# GEC.CFG # This is an example configuration file for the MVIxx-GEC module. # # COMPANY : ProSoft Technology Inc. # DATE : October 17, 2001 # # # This section of the file describes the database setup and module level # parameters. # [Module] Module Name : MVIxx-GEC Communication Module DEFAULT # These sections are used to define the five servers for the module. # [Server 0] Enabled : Yes #(Y/N) Server is enabled Service Port Number : 15000 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Tx #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 1] Enabled : Yes #(Y/N) Server is enabled Service Port Number : 15001 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Tx #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 2] Enabled : Yes #(Y/N) Server is enabled Service Port Number : 15002 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Tx #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 3] Enabled : Yes #(Y/N) Server is enabled Service Port Number : 15003 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Tx #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 4] Enabled : Yes #(Y/N) Server is enabled Service Port Number : 15004 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Tx #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N)