# GEC.CFG # This is an example configuration file for the PTQ-GEC module. # # COMPANY : ProSoft Technology Inc. # DATE : May 25, 2005 # # # This section of the file describes the Name of the mdodule. # [Module] Module Name : PTQ-GEC Communication Module DEFAULT # This section is required for the PTQ platform [Backplane] Input Start Register : 1 #3X word offset where data is placed by module (1-n) Output Start Register : 1 #4x word offset where data is read by module (1-n) # These sections are used to define the five servers for the module. # [Server 0] Enabled : Yes #(Y/N) Server is enabled Service Port Number : 2201 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Rx/Tx, #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 1] Enabled : Y #(Y/N) Server is enabled Service Port Number : 2202 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Rx/Tx, #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 2] Enabled : Y #(Y/N) Server is enabled Service Port Number : 2203 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Rx/Tx, #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 3] Enabled : Y #(Y/N) Server is enabled Service Port Number : 2204 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Rx/Tx, #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N) # ------------------------------------------------------------------------- [Server 4] Enabled : Y #(Y/N) Server is enabled Service Port Number : 2205 #TCP port for this service Connection Timeout : 0 #0=no timeout, #else # of mSec before disconnect Connection Close Type : 0 #0=Client will close socket, #1=close after Rx/Tx, #2=Close after Rx Swap Rx Data Bytes : No #Swap bytes in message received (Y/N) Swap Tx Data Bytes : No #Swap bytes in message transmitted (Y/N)