# PDPS.CFG # This is an example configuration file for the PTQ-PDPS module. # # COMPANY : ProSoft Technology Inc. # DATE : May 25, 2005 # # # This section of the file describes the database setup and module level # parameters. # [Module] Module Type : PTQ-PDPS Module Name : PTQ-PDPS Communication Module DEFAULT # This section is required for the PTQ platform [Backplane] Input Start Register : 1 #3X word offset where data is placed by module Output Start Register : 1 #4x word offset where data is read by module #####################NOTE######################################## #For Quantum Processors User must configure quantum Memory (3x and 4x) #at least 250 words in order to get data transfer between the module and processor. ################################################################# # This is the data area for setting the Profibus Slave parameters [Profibus Slave] Slave Address : 6 #Profibus node address for slave (0-125) Swap Input Bytes : No #Swap bytes in input image (Yes or No) Swap Output Bytes : No #Swap bytes in output image (Yes or No) Comm Failure Mode : 1 #0=x-fer on comm fail, 1=no x-fer on fail Comm Timeout Multiplier : 1 #(1 to 10) * 125 mSec communication timeout