;============================================================ ; Profibus Device Database of : ; ProSoft Technology Inc. DP slave ; Model : 3170-PDP ; Description : Flex I/O Profibus adapter ; Language : English ; Date : 10 April 2007 ; Author : ProSoft Technology Inc. ;============================================================ #Profibus_DP GSD_Revision = 2 ; Device identification Vendor_Name = " ProSoft Technology Inc " Model_Name = " 3170-PDP " Revision = " Version 2.2 " Ident_Number = 0x0882 Protocol_Ident = 0 ; DP protocol Station_Type = 0 ; Slave device FMS_supp = 0 ; FMS not supported Hardware_Release = " Series A " Software_Release = " Rev. >= 1.6 " ; Supported baudrates 9.6_supp = 1 19.2_supp = 1 45.45_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5M_supp = 1 3M_supp = 1 6M_supp = 1 12M_supp = 1 ; Maximum responder time for supported baudrates MaxTsdr_9.6 = 60 MaxTsdr_19.2 = 60 MaxTsdr_45.45 = 250 MaxTsdr_93.75 = 60 MaxTsdr_187.5 = 60 MaxTsdr_500 = 100 MaxTsdr_1.5M = 150 MaxTsdr_3M = 250 MaxTsdr_6M = 450 MaxTsdr_12M = 800 ; Supported hardware features Redundancy = 0 ; not supported Repeater_Ctrl_Sig = 2 ; TTL 24V_Pins = 0 ; not connected Implementation_Type = "SPC3" ; Supported DP features Freeze_Mode_supp = 1 ; supported Sync_Mode_supp = 1 ; supported Auto_Baud_supp = 1 ; supported Set_Slave_Add_supp = 0 ; not supported ; Max Length of User Parameter Max_User_Prm_Data_Len = 237 ; Maximum polling frequency Min_Slave_Intervall = 1 ;100 µs ; Maximum supported sizes Modular_Station = 1 ; modular Max_Module = 9 ; physical modules = slots Max_Input_Len = 244 Max_Output_Len = 244 Max_Data_Len = 488 Modul_Offset = 1 Slave_Family = 3 Max_Diag_Data_Len = 15 ; Meaning of "device diagnostic" field ;The first two bytes (corresponding to Unit_Diag_Area = 0-15) ;contains information about the actual firmware version. ;The third byte (corresponding to Unit_Diag_Area = 16-23) ;indicates if the address switch has been altered. Unit_Diag_Bit (16) = "Node address changed" ;The fourth byte (corresponding to Unit_Diag_Area = 24-31) contains ;the current setting of the node address switch. ;Please look at the user manual (section "Troubleshooting") for a detailed ;explanation about the meaning of these bytes. ;--------------------------------- ;Prm-Text-Def-List: The Flag byte ;--------------------------------- ;Format selection PrmText = 1 Text(0) = "Auto Configure format" Text(2) = "Condensed format" Text(3) = "Full format" EndPrmText ;Output Fault action PrmText = 2 Text(0) = "Reset to zero" Text(1) = "Hold Last State" Text(2) = "Use Safe State" EndPrmText ;Input fault action PrmText = 3 Text(0) = "Reset to zeros" Text(1) = "Hold Last State" EndPrmText ;Module specific PrmText = 4 Text(0) = "8.6 ms / 26.6 ms" Text(1) = " 9 ms / 27 ms" Text(2) = "10 ms / 28 ms" Text(3) = "12 ms / 30 ms" Text(4) = "17 ms / 35 ms" Text(5) = "26 ms / 44 ms" Text(6) = "43 ms / 61 ms" Text(7) = "78 ms / 96 ms" EndPrmText PrmText = 5 Text(0) = "512 us" Text(1) = "1 ms" Text(2) = "2 ms" Text(3) = "4 ms" Text(4) = "8 ms" Text(5) = "16 ms" Text(6) = "32 ms" Text(7) = "64 ms" EndPrmText PrmText = 6 Text(0) = "Disable" Text(1) = "Enable" EndPrmText PrmText = 7 Text(0) = "Degree Celsius" Text(1) = "Degree Fahrenheit" Text(2) = "Bipolar" Text(3) = "Unipolar" EndPrmText PrmText = 8 Text(0) = "No enhanced mode" Text(1) = "Enhanced mode" EndPrmText PrmText = 9 Text(0) = "10 Hz" Text(1) = "25 Hz" Text(2) = "50 Hz" Text(3) = "60 Hz" Text(4) = "100 Hz" Text(5) = "250 Hz" Text(6) = "500 Hz" Text(7) = "1000 Hz" EndPrmText PrmText = 10 Text(0) = "Resistance" Text(1) = "No sensor connected" Text(2) = "100 ohm Pt a = 0.00385 Euro" Text(3) = "100 ohm Pt a = 0.003916 US" Text(4) = "200 ohm Pt a = 0.00385" Text(5) = "500 ohm Pt a = 0.00385" Text(7) = "10 ohm copper" Text(8) = "120 ohm nickel" Text(9) = "100 ohm nickel" Text(10) = "200 ohm nickel" Text(11) = "500 ohm nickel" Text(12) = "Module data time stamp" EndPrmText PrmText = 11 Text(0) = "Software digital filter disabled" Text(1) = "Software digital filter enabled" EndPrmText PrmText = 12 Text(0) = "Millivolts" Text(1) = "B 300 to 1800 C" Text(2) = "E -270 to 1000 C" Text(3) = "J -210 to 1200 C" Text(4) = "K -71 to 1372 C" Text(5) = "R -50 to 1768 C" Text(6) = "S -50 to 1768 C" Text(7) = "T -73 to 400 C" Text(8) = "C 0 to 2315 C" Text(9) = "N -270 to 1300 C" Text(12) = "Rep cold temp for channels 0-3" Text(13) = "Rep cold temp for channels 4-7" EndPrmText PrmText = 13 Text(0) = "7.5 ms / 26.5 ms" Text(1) = "8 ms / 27 ms" Text(2) = "9 ms / 28 ms" Text(3) = "10 ms / 29 ms" Text(4) = "12 ms / 31 ms" Text(5) = "16 ms / 35 ms" Text(6) = "24.5 ms / 44 ms" Text(7) = "42 ms / 60.5 ms" EndPrmText PrmText = 14 Text(0) = "256 us" Text(1) = "512 us" Text(2) = "1 ms" Text(3) = "2 ms" Text(4) = "4 ms" Text(5) = "8 ms" Text(6) = "16 ms" Text(7) = "32 ms" EndPrmText PrmText = 15 Text(0) = "No reset" Text(1) = "Reset" EndPrmText PrmText = 16 Text(0) = "Standard input filtered data" Text(1) = "Fast input" EndPrmText PrmText = 17 Text(0) = "0.25 ms" Text(1) = "0.5 ms" Text(2) = "1 ms" Text(3) = "2 ms" Text(4) = "4 ms" Text(5) = "8 ms" Text(6) = "16 ms" Text(7) = "32 ms" EndPrmText PrmText = 18 Text(0) = "Use word 6" Text(1) = "Use word 0" EndPrmText PrmText = 19 Text(0) = "Disabled" Text(1) = "Enabled" EndPrmText PrmText = 20 Text(0) = "Degree Celsius" Text(1) = "Degree Fahrenheit" Text(2) = "Degree Kelvin" Text(3) = "-32767 to +32767" Text(4) = "0 to 65536" EndPrmText PrmText = 21 Text(0) = "0 C" Text(1) = "20 C" Text(2) = "25 C" Text(3) = "30 C" Text(4) = "40 C" Text(5) = "50 C" Text(6) = "60 C" Text(7) = "70 C" EndPrmText PrmText = 22 Text(0) = "Hardware filtering only" Text(1) = "25 ms" Text(2) = "100 ms" Text(3) = "250 ms" Text(4) = "500 ms" Text(5) = "1 s" Text(6) = "2 s" Text(7) = "5 s" EndPrmText PrmText = 23 Text(0) = "Thermocouple" Text(1) = "RTD" EndPrmText PrmText = 24 Text(0) = "Ext comp/2-wire, no comp" Text(1) = "Int comp/2-wire, user sel comp" Text(2) = "No comp/3-wire RTD" Text(3) = "Diff measure 2 ch/4-wire RTD" EndPrmText PrmText = 25 Text(0) = "Resistance/mV" Text(1) = "100 ohm -200 - 870C/300 - 1800C" Text(2) = "200 ohm -200 - 400C/-270 - 1000C" Text(3) = "100 ohm -200 - 630C/-210 - 1200C" Text(4) = "100 ohm -200 - 400C/-270 - 1372C" Text(5) = "100 ohm nickel/-200 - 800C" Text(6) = "200 ohm nickel/-270 - 1300C" Text(7) = "120 ohm nickel/-50 - 1768C" Text(8) = "10 ohm copper/-50 - 1768C" Text(9) = "--/-270 - 400C" EndPrmText PrmText = 26 Text(0) = "0 ohm" Text(1) = "5 ohm" Text(2) = "10 ohm" Text(3) = "15 ohm" EndPrmText Prmtext = 27 Text(0) = "1 - 32767" Text(1) = "1.0 - 3276.7" EndPrmText PrmText = 28 Text(0) = "Use minimum sampling time" Text(1) = "2" Text(2) = "4" Text(3) = "8" Text(4) = "16" Text(5) = "32" Text(6) = "64" Text(7) = "128" EndPrmText PrmText = 29 Text(0) = "No multiplier" Text(1) = "X2" Text(2) = "X4" Text(3) = "X32" EndPrmText PrmText = 30 Text(0) = "Safe state act by bus comm" Text(1) = "Safe state act by any failure" EndPrmText PrmText = 31 Text(0) = "Reset outputs" Text(1) = "Hold last state" EndPrmText PrmText = 32 Text(0) = "Disabled" Text(1) = "Alarm only(frequency unchanged)" Text(2) = "Alarm and force frequency to max" Text(3) = "Alarm and force frequency to min" EndPrmText PrmText = 33 Text(0) = "No multiplier, alarm immediately" Text(1) = "2 sample periods + 2s delay" Text(2) = "8 sample periods + 2s delay" Text(3) = "32 sample periods + 2s delay" EndPrmText PrmText = 34 Text(0) = "Frequency alarm" Text(1) = "Acceleration alarm" EndPrmText PrmText = 35 Text(0) = "Rolling average" Text(1) = "8" Text(2) = "16" Text(3) = "32" EndPrmText PrmText = 36 Text(0) = "Normal run mode" Text(1) = "Startup mode" EndPrmText PrmText = 37 Text(0) = "2" Text(1) = "4" Text(2) = "5" Text(3) = "10" Text(4) = "20" Text(5) = "50" Text(6) = "100" Text(7) = "200" Text(8) = "500" Text(9) = "1000" EndPrmText PrmText = 38 Text(0) = "Normal (Active high, 24V=On)" Text(1) = "Invert input (Active low, 0V=On)" EndPrmtext PrmText = 39 Text(0) = "Count on rising edge" Text(1) = "Quadrature encoder X1" Text(2) = "Quadrature encoder X2" Text(3) = "Quadrature encoder X4" Text(4) = "Count up sig A, down sig B" Text(5) = "No count" Text(6) = "No count" Text(7) = "No count" EndPrmtext PrmText = 40 Text(0) = "No gate func on input G" Text(1) = "Counting if G is high" Text(2) = "Counting if G is low" Text(3) = "Counter can be cal if G high" EndPrmText PrmText = 41 Text(0) = "Save counter on pos edge Z" Text(1) = "Save counter on pos edge G" Text(2) = "Save counter on neg edge G" Text(3) = "Save counter on neg & pos edge G" EndPrmtext PrmText = 42 Text(0) = "Pulse counting and period time" Text(1) = "Period time" EndPrmText PrmText = 43 Text(0) = "Period time with 10MHz clock" Text(1) = "Period time with 1MHz clock" EndPrmText PrmText = 44 Text(0) = "1 period" Text(1) = "2 periods" Text(2) = "4 periods" Text(3) = "8 periods" Text(4) = "16 periods" Text(5) = "32 periods" Text(6) = "64 periods" Text(7) = "128 periods" EndPrmText ; Bentley Nevada specific PrmText = 46 Text(0) = "0-3 mils" Text(1) = "0-5 mils" Text(2) = "0-10 mils" Text(3) = "0-15 mils" Text(4) = "0-20 mils" Text(5) = "0-100 um" Text(6) = "0-125 um" Text(7) = "0-150 um" Text(8) = "0-200 um" Text(9) = "0-250 um" Text(10) = "0-300 um" Text(11) = "0-400 um" Text(12) = "0-500 um" EndPrmText PrmText = 47 Text(0) = "4 Hz" Text(1) = "1 Hz" EndPrmText PrmText = 48 Text(0) = "4000 Hz" Text(1) = "600 Hz" EndPrmText PrmText = 49 Text(0) = "0.15 s" Text(1) = "0.20 s" Text(2) = "0.30 s" Text(3) = "0.50 s" Text(4) = "0.60 s" Text(5) = "1.00 s" Text(6) = "2.00 s" Text(7) = "3.00 s" Text(8) = "5.00 s" Text(9) = "6.00 s" Text(10) = "10.00 s" Text(11) = "20.00 s" EndPrmText PrmText = 50 Text(0) = "Normal operation" Text(1) = "Reset" EndPrmText PrmText = 51 Text(0) = "None" Text(1) = "Internal galvanic isolator" Text(2) = "External zener barrier" Text(3) = "External galvanic isolator" EndPrmText PrmText = 52 Text(0) = "Monitor will not accept conf" Text(1) = "Normal operation mode" EndPrmText PrmText = 53 Text(0) = "None" Text(1) = "1.5" Text(2) = "2.0" Text(3) = "3.0" EndPrmText PrmText = 54 Text(0) = "Not active" Text(1) = "Active" EndPrmText PrmText = 56 Text(0) = "Thrust direction towards probe" Text(1) = "Thrust direction away from probe" EndPrmText PrmText = 58 Text(0) = "0-0.5 in/s pk" Text(1) = "0-1.0 in/s pk" Text(2) = "0-2.0 in/s pk" Text(8) = "0-10 mm/s pk" Text(9) = "0-20 mm/s pk" Text(10) = "0-50 mm/s pk" Text(16) = "0-5 mils pp, integrated vel" Text(17) = "0-10 mils pp, integrated vel" Text(18) = "0-20 mils pp, integrated vel" Text(24) = "0-100 um pp, integrated vel" Text(25) = "0-200 um pp, integrated vel" Text(26) = "0-500 um pp, integrated vel" Text(32) = "0-0.5 in/s rms" Text(33) = "0-1.0 in/s rms" Text(34) = "0-2.0 in/s rms" Text(40) = "0-10 mm/s rms" Text(41) = "0-20 mm/s rms" Text(42) = "0-40 mm/s rms" Text(43) = "0-50 mm/s rms" EndPrmText PrmText = 59 Text(0) = "TOK off" Text(1) = "TOK on" EndPrmText PrmText = 60 Text(0) = "3 Hz" Text(1) = "10 Hz" Text(2) = "15 Hz" Text(3) = "18 Hz" Text(4) = "20 Hz" Text(5) = "25 Hz" Text(6) = "30 Hz" Text(7) = "50 Hz" Text(8) = "60 Hz" Text(9) = "80 Hz" Text(10) = "100 Hz" Text(11) = "120 Hz" Text(12) = "110 Hz" EndPrmText PrmText = 61 Text(0) = "5500 Hz" Text(1) = "4000 Hz" Text(2) = "3000 Hz" Text(3) = "2000 Hz" Text(4) = "1600 Hz" Text(5) = "1400 Hz" Text(6) = "1200 Hz" Text(7) = "1000 Hz" Text(8) = "800 Hz" Text(9) = "600 Hz" Text(10) = "400 Hz" Text(11) = "200 Hz" Text(12) = "120 Hz" Text(13) = "100 Hz" Text(14) = "450 Hz" EndPrmText PrmText = 63 Text(0) = "0-2 gs pk" Text(1) = "0-5 gs pk" Text(2) = "0-10 gs pk" Text(3) = "0-20 gs pk" Text(4) = "0-25 gs pk" Text(5) = "0-40 gs pk" Text(6) = "0-50 gs pk" Text(8) = "0-20 m/s2 pk" Text(9) = "0-50 m/s2 pk" Text(10) = "0-100 m/s2 pk" Text(11) = "0-200 m/s2 pk" Text(12) = "0-250 m/s2 pk" Text(13) = "0-400 m/s2 pk" Text(14) = "0-500 m/s2 pk" Text(16) = "0-1.0 in/s, int acc" Text(17) = "0-2.0 in/s, int acc" Text(24) = "0-25 mm/s pk, int acc" Text(25) = "0-50 mm/s pk, int acc" Text(26) = "0-100 mm/s pk, int acc" Text(32) = "0-2 gs rms acc" Text(33) = "0-5 gs rms acc" Text(34) = "0-10 gs rms acc" Text(35) = "0-20 gs rms acc" Text(36) = "0-25 gs rms acc" Text(37) = "0-40 gs rms acc" Text(38) = "0-50 gs rms acc" Text(40) = "0-20 m/s2 rms acc" Text(41) = "0-50 m/s2 rms acc" Text(42) = "0-100 m/s2 rms acc" Text(43) = "0-200 m/s2 rms acc" Text(44) = "0-250 m/s2 rms acc" Text(45) = "0-400 m/s2 rms acc" Text(46) = "0-500 m/s2 rms acc" Text(48) = "0-1.0 in/s rms, int rms acc" Text(49) = "0-2.0 in/s rms, int rms acc" Text(56) = "0-25 mm/s rms, int rms acc" Text(57) = "0-50 mm/s rms, int rms acc" Text(58) = "0-100 mm/s rms, int rms acc" EndPrmText PrmText = 64 Text(1) = "Dual accel, 14.05 kHz" Text(2) = "Dual accel, 31.55 kHz" Text(3) = "Single channel accel, 23.4 kHz" EndPrmText PrmText = 65 Text(1) = "01" EndPrmText PrmText = 66 Text(0) = "73.5kHz or min 0.007ms pulsewdth" Text(1) = "37.8kHz or min 0.013ms pulsewdth" Text(2) = "12.8kHz or min 0.04ms pulsewdth" Text(3) = "1.2kHz or min 0.4ms pulsewdth" EndPrmText ;======================================== ;End of all the Text string definitions. ExtUserPrmData = 1 "Format Selection" BitArea(0-1) 0 0,2,3 Prm_Text_Ref = 1 EndExtUserPrmData ExtUserPrmData = 2 "Output Fault Action" BitArea(2-3) 0 0-2 Prm_Text_Ref = 2 EndExtUserPrmData ExtUserPrmData = 3 "Input Fault Action" Bit(4) 0 0-1 Prm_Text_Ref = 3 EndExtUserPrmData ExtUserPrmData = 4 "Input delay time" BitArea(0-2) 0 0-7 Prm_Text_Ref = 4 EndExtUserPrmData ExtUserPrmData = 5 "Delay Time for Inputs 00-11" BitArea(0-2) 0 0-7 Prm_Text_Ref = 5 EndExtUserPrmData ExtUserPrmData = 6 "Delay Time for Inputs 12-15" BitArea(3-5) 0 0-7 Prm_Text_Ref = 5 EndExtUserPrmData ExtUserPrmData = 7 "Safe state value word 0" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 8 "Safe state value word 1" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 9 "Safe state value word 2" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 10 "Safe state value word 3" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 11 "Range selection" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 12 "Channel 0 output" Bit(0) 1 0-1 Prm_Text_Ref = 6 EndExtUserPrmData ExtUserPrmData = 13 "Channel 1 output" Bit(1) 1 0-1 Prm_Text_Ref = 6 EndExtUserPrmData ExtUserPrmData = 14 "Channel 2 output" Bit(2) 1 0-1 Prm_Text_Ref = 6 EndExtUserPrmData ExtUserPrmData = 15 "Channel 3 output" Bit(3) 1 0-1 Prm_Text_Ref = 6 EndExtUserPrmData ExtUserPrmData = 16 "Safe state value byte" Unsigned8 0 0-255 EndExtUserPrmData ExtUserPrmData = 17 "Calibration mask" Unsigned8 0 0-255 EndExtUserPrmData ExtUserPrmData = 18 "Module data type" BitArea(0-1) 0 0-3 Prm_Text_Ref = 7 EndExtUserPrmData ExtUserPrmData = 19 "Enhanched mode selct" Bit(2) 0 0-1 Prm_Text_Ref = 8 EndExtUserPrmData ExtUserPrmData = 20 "A/D filter first notch frequency" BitArea(3-5) 0 0-7 Prm_Text_Ref = 9 EndExtUserPrmData ExtUserPrmData = 21 "Channel 0 RTD type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 22 "Channel 1 RTD type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 23 "Channel 2 RTD type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 24 "Channel 3 RTD type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 25 "Channel 4 RTD type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 26 "Channel 5 RTD type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 27 "Channel 6 RTD type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 28 "Channel 7 RTD type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 10 EndExtUserPrmData ExtUserPrmData = 29 "Fixed digital filter" Bit(2) 0 0-1 Prm_Text_Ref = 11 EndExtUserPrmData ExtUserPrmData = 30 "Channel 0 Thermocouple type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 31 "Channel 1 Thermocouple type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 32 "Channel 2 Thermocouple type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 33 "Channel 3 Thermocouple type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 34 "Channel 4 Thermocouple type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 35 "Channel 5 Thermocouple type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 36 "Channel 6 Thermocouple type" BitArea(0-3) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 37 "Channel 7 Thermocouple type" BitArea(4-7) 0 0-15 Prm_Text_Ref = 12 EndExtUserPrmData ExtUserPrmData = 38 "Input delay time" BitArea(0-2) 0 0-7 Prm_Text_Ref = 5 EndExtUserPrmData ExtUserPrmData = 39 "Delay time input 0-11" BitArea(0-2) 0 0-7 Prm_Text_Ref = 13 EndExtUserPrmData ExtUserPrmData = 40 "Delay time input 12-15" BitArea(3-5) 0 0-7 Prm_Text_Ref = 13 EndExtUserPrmData ExtUserPrmData = 41 "Delay time input" BitArea(0-2) 0 0-7 Prm_Text_Ref = 13 EndExtUserPrmData ExtUserPrmData = 42 "Filter time for inputs" BitArea(0-2) 0 0-7 Prm_Text_Ref = 14 EndExtUserPrmData ExtUserPrmData = 43 "Counter reset" Bit(4) 0 0-1 Prm_Text_Ref = 15 EndExtUserPrmData ExtUserPrmData = 44 "Counter fast" Bit(5) 0 0-1 Prm_Text_Ref = 16 EndExtUserPrmData ExtUserPrmData = 45 "Input filter time, 0-9/11" BitArea(0-2) 0 0-7 Prm_Text_Ref = 17 EndExtUserPrmData ExtUserPrmData = 46 "Input filter time, 12-15" BitArea(3-5) 0 0-7 Prm_Text_Ref = 17 EndExtUserPrmData ExtUserPrmData = 47 "Delay Time for Inputs 0-3" BitArea(0-2) 0 0-7 Prm_Text_Ref = 5 EndExtUserPrmData ExtUserPrmData = 48 "Safe state, 4 bits" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtUserPrmData = 49 "Safe state, 2 bits" BitArea(0-1) 0 0-3 EndExtUserPrmData ExtUserPrmData = 50 "Delay Time for Inputs 0-1" BitArea(0-2) 0 0-7 Prm_Text_Ref = 5 EndExtUserPrmData ExtUserPrmData = 51 "Full range bits" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtUserPrmData = 52 "Configure select bits" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtUserPrmdata = 53 "Multiplex control bits" BitArea(0-1) 0 0-3 EndExtUserPrmData ExtUserPrmdata = 54 "Configure select bits" BitArea(0-1) 0 0-3 EndExtUserPrmData ExtUserPrmdata = 55 "Full range bits" BitArea(0-1) 0 0-3 EndExtUserPrmData ExtUserPrmData = 56 "Multiplex control bit" Bit(0) 0 0-1 Prm_Text_Ref = 18 EndExtUserPrmData ExtUserPrmdata = 57 "Configure select bits" BitArea(0-4) 0 0-31 EndExtUserPrmData ExtUserPrmdata = 58 "Full range bits" BitArea(0-4) 0 0-31 EndExtUserPrmData ExtUserPrmdata = 59 "Channel 3,2,1,0 filter" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmdata = 60 "Channel 3,2,1,0 configuration" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmdata = 61 "Real time sample interval" Unsigned16 0 0-32767 EndExtUserPrmData ExtUserPrmData = 62 "Initiate configuration" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 63 "Transparent bit" Bit(5) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 64 "Interrupt toggle bit" Bit(4) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 65 "Revert to defaults" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 66 "Quick calibration" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 67 "Calibration clock" Bit(5) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 68 "Gain offset select" Bit(4) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 69 "Channel 0" Bit(0) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 70 "Channel 1" Bit(1) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 71 "Channel 2" Bit(2) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 72 "Channel 3" Bit(3) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 73 "One" Bit(6) 1 1-1 EndExtUserPrmData ExtUserPrmData = 74 "Outputs to hold, Channel 0" Bit(0) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 75 "Outputs to hold, Channel 1" Bit(1) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 76 "Outputs to hold, Channel 2" Bit(2) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 77 "Outputs to hold, Channel 3" Bit(3) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 78 "Input channel 1 filter" BitArea(4-7) 0 0-15 EndExtUserPrmData ExtUserPrmData = 79 "Input channel 0 filter" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtUserPrmData = 80 "Output channel 1 configuration" BitArea(4-7) 0 0-15 EndExtUserPrmData ExtUserPrmData = 81 "Output channel 0 configuration" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtUserPrmData = 82 "Input channel 1 configuration" BitArea(4-7) 0 0-15 EndExtUserPrmData ExtUserPrmData = 83 "Input channel 0 configuration" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtUserPrmData = 84 "Input Channel 0" Bit(0) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 85 "Input Channel 1" Bit(1) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 86 "Output Channel 0" Bit(2) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 87 "Output Channel 1" Bit(3) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 88 "Outputs to hold, Channel 1" Bit(3) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 89 "Outputs to hold, Channel 0" Bit(2) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 90 "Calibration" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 91 "Calibration clock" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 92 "Data format for all channels" BitArea(0-3) 0 0-4 Prm_Text_Ref = 20 EndExtUserPrmData ExtUserPrmData = 93 "Fault mode channels 4-7" Bit(7) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 94 "Fault mode channels 0-3" Bit(6) 1 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 95 "Reference junction selection" BitArea(3-5) 0 0-7 Prm_Text_Ref = 21 EndExtUserPrmData ExtUserPrmData = 96 "Filter cut-off" BitArea(0-2) 0 0-7 Prm_Text_Ref = 22 EndExtUserPrmData ExtUserPrmData = 97 "Input type sel ch 4-7" BitArea(6-7) 0 0-1 Prm_Text_Ref = 23 EndExtUserPrmData ExtUserPrmData = 98 "Input type sel ch 0-3" BitArea(6-7) 0 0-1 Prm_Text_Ref = 23 EndExtUserPrmData ExtUserPrmData = 99 "Sensor mode ch 4-7 Thermo/RTD" BitArea(4-5) 0 0-3 Prm_Text_Ref = 24 EndExtUserPrmData ExtUserPrmData = 100 "Sensor mode ch 0-3 Thermo/RTD" BitArea(4-5) 0 0-3 Prm_Text_Ref = 24 EndExtUserPrmData ExtUserPrmData = 101 "Sensor type ch 4-7 RTD/Thermo" BitArea(0-3) 0 0-9 Prm_Text_Ref = 25 EndExtUserPrmData ExtUserPrmData = 102 "Sensor type ch 0-3 RTD/Thermo" BitArea(0-3) 0 0-9 Prm_Text_Ref = 25 EndExtUserPrmData ExtUserPrmData = 103 "RTD offset Channel 7" BitArea(6-7) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmData = 104 "RTD offset Channel 6" BitArea(4-5) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmData = 105 "RTD offset Channel 5" BitArea(2-3) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmData = 106 "RTD offset Channel 4" BitArea(0-1) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmData = 107 "RTD offset Channel 3" BitArea(6-7) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmData = 108 "RTD offset Channel 2" BitArea(4-5) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmData = 109 "RTD offset Channel 1" BitArea(2-3) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmData = 110 "RTD offset Channel 0" BitArea(0-1) 0 0-3 Prm_Text_Ref = 26 EndExtUserPrmData ExtUserPrmdata = 111 "EDT command word" Unsigned16 0 0-32767 EndExtUserPrmData ExtUserPrmData = 112 "Communication fault" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 113 "Safe state mode" Bit(6) 0 0-1 Prm_Text_Ref = 31 EndExtUserPrmData ExtUserPrmData = 114 "Frequency range Ch 0" Bit(5) 0 0-1 Prm_Text_Ref = 27 EndExtUserPrmData ExtUserPrmData = 115 "Frequency range Ch 1" Bit(5) 0 0-1 Prm_Text_Ref = 27 EndExtUserPrmData ExtUserPrmData = 116 "Pulses to terminate sampl, Ch 0" BitArea(2-4) 0 0-7 Prm_Text_Ref = 28 EndExtUserPrmData ExtUserPrmData = 117 "Pulses to terminate sampl, Ch 1" BitArea(2-4) 0 0-7 Prm_Text_Ref = 28 EndExtUserPrmData ExtUserPrmData = 118 "Missing pulse multiplier, Ch 0" BitArea(0-1) 0 0-3 Prm_Text_Ref = 29 EndExtUserPrmData ExtUserPrmData = 119 "Missing pulse multiplier, Ch 1" BitArea(0-1) 0 0-3 Prm_Text_Ref = 29 EndExtUserPrmData ExtUserPrmData = 120 "Local fault mode" Bit(6) 0 0-1 Prm_Text_Ref = 30 EndExtUserPrmData ExtUserPrmData = 121 "Maximum frequency Ch 0" Unsigned16 0 0-32767 EndExtUserPrmData ExtUserPrmData = 122 "Maximum frequency Ch 1" Unsigned16 0 0-32767 EndExtUserPrmData ExtUserPrmData = 123 "Freq scaling multiplier Ch 0" Unsigned8 0 0-255 EndExtUserPrmData ExtUserPrmData = 124 "Freq scaling multiplier Ch 1" Unsigned8 0 0-255 EndExtUserPrmData ExtUserPrmData = 125 "Wire off fault sel GI, Ch 0" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 126 "Wire off fault sel GI, Ch 1" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 127 "Wire off fault sel FI, Ch 0" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 128 "Wire off fault sel FI, Ch 1" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 129 "Invert select GI, Ch 0" Bit(5) 0 0-1 Prm_Text_Ref = 38 EndExtUserPrmData ExtUserPrmData = 130 "Invert select GI, Ch 1" Bit(5) 0 0-1 Prm_Text_Ref = 38 EndExtUserPrmData ExtUserPrmData = 131 "Invert select FI, Ch 0" Bit(4) 0 0-1 Prm_Text_Ref = 38 EndExtUserPrmData ExtUserPrmData = 132 "Invert select FI, Ch 1" Bit(4) 0 0-1 Prm_Text_Ref = 38 EndExtUserPrmData ExtUserPrmData = 133 "Min freq sampling time, Ch 0" BitArea(0-3) 0 0-9 Prm_Text_Ref = 37 EndExtUserPrmData ExtUserPrmData = 134 "Min freq sampling time, Ch 1" BitArea(0-3) 0 0-9 Prm_Text_Ref = 37 EndExtUserPrmData ExtUserPrmData = 135 "Initiate startup select, Ch 0" Bit(7) 0 0-1 Prm_Text_Ref = 36 EndExtUserPrmData ExtUserPrmData = 136 "Initiate startup select, Ch 1" Bit(7) 0 0-1 Prm_Text_Ref = 36 EndExtUserPrmData ExtUserPrmData = 137 "Acceleration calc time, Ch 0" BitArea(5-6) 0 0-3 Prm_Text_Ref = 35 EndExtUserPrmData ExtUserPrmData = 138 "Acceleration calc time, Ch 1" BitArea(5-6) 0 0-3 Prm_Text_Ref = 35 EndExtUserPrmData ExtUserPrmData = 139 "Freq/Acc alarm select, Ch 0" Bit(4) 0 0-1 Prm_Text_Ref = 34 EndExtUserPrmData ExtUserPrmData = 140 "Freq/Acc alarm select, Ch 1" Bit(4) 0 0-1 Prm_Text_Ref = 34 EndExtUserPrmData ExtUserPrmData = 141 "Missing pulse delay mult, Ch 0" BitArea(2-3) 0 0-3 Prm_Text_Ref = 33 EndExtUserPrmData ExtUserPrmData = 142 "Missing pulse delay mult, Ch 1" BitArea(2-3) 0 0-3 Prm_Text_Ref = 33 EndExtUserPrmData ExtUserPrmData = 143 "Wire off/Missing pulse, Ch 0" BitArea(0-1) 0 0-3 Prm_Text_Ref = 32 EndExtUserPrmData ExtUserPrmData = 144 "Wire off/Missing pulse, Ch 1" BitArea(0-1) 0 0-3 Prm_Text_Ref = 32 EndExtUserPrmData ExtUserPrmData = 145 "Preset reset, CW0" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 146 "Store reset, CW0" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 147 "Rollover, CW0" Bit(5) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 148 "Store control, CW0" BitArea(3-4) 0 0-3 Prm_Text_Ref = 41 EndExtUserPrmData ExtUserPrmData = 149 "Gate control, CW0" BitArea(1-2) 0 0-3 Prm_Text_Ref = 40 EndExtUserPrmData ExtUserPrmData = 150 "Cal cntrl, Reset, CW0" Bit(0) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 151 "Cal cntrl, Direction, CW0" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 152 "Cal cntrl, Enable, CW0" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 153 "Count enable, CW0" Bit(5) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 154 "Enable Z preset, CW0" Bit(4) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 155 "Preset bit, CW0" Bit(3) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 156 "Mode selection, CW0" BitArea(0-2) 0 0-7 Prm_Text_Ref = 39 EndExtUserPrmData ExtUserPrmData = 157 "Preset reset, CW1" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 158 "Store reset, CW1" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 159 "Rollover, CW1" Bit(5) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 160 "Store control, CW1" BitArea(3-4) 0 0-3 Prm_Text_Ref = 41 EndExtUserPrmData ExtUserPrmData = 161 "Gate control, CW1" BitArea(1-2) 0 0-3 Prm_Text_Ref = 40 EndExtUserPrmData ExtUserPrmData = 162 "Cal cntrl, Reset, CW1" Bit(0) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 163 "Cal cntrl, Direction, CW1" Bit(7) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 164 "Cal cntrl, Enable, CW1" Bit(6) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 165 "Count enable, CW1" Bit(5) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 166 "Enable Z preset, CW1" Bit(4) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 167 "Preset bit, CW1" Bit(3) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 168 "Mode selection, CW1" BitArea(0-2) 0 0-7 Prm_Text_Ref = 39 EndExtUserPrmData ExtUserPrmData = 169 "Channel 0 Preset" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 170 "Channel 1 Preset" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 171 "Pulse/period measurement, Ch 3" Bit(3) 0 0-1 Prm_Text_Ref = 42 EndExtUserPrmData ExtUserPrmData = 172 "Pulse/period measurement, Ch 2" Bit(2) 0 0-1 Prm_Text_Ref = 42 EndExtUserPrmData ExtUserPrmData = 173 "Pulse/period measurement, Ch 1" Bit(1) 0 0-1 Prm_Text_Ref = 42 EndExtUserPrmData ExtUserPrmData = 174 "Pulse/period measurement, Ch 0" Bit(0) 0 0-1 Prm_Text_Ref = 42 EndExtUserPrmData ExtUserPrmData = 175 "Period nr selection, Ch 3" BitArea(5-7) 0 0-7 Prm_Text_Ref = 44 EndExtUserPrmData ExtUserPrmData = 176 "Clock freq for period time, Ch 3" Bit(4) 0 0-1 Prm_Text_Ref = 43 EndExtUserPrmData ExtUserPrmData = 177 "Period nr selection, Ch 2" BitArea(1-3) 0 0-7 Prm_Text_Ref = 44 EndExtUserPrmData ExtUserPrmData = 178 "Clock freq for period time, Ch 2" Bit(0) 0 0-1 Prm_Text_Ref = 43 EndExtUserPrmData ExtUserPrmData = 179 "Period nr selection, Ch 1" BitArea(5-7) 0 0-7 Prm_Text_Ref = 44 EndExtUserPrmData ExtUserPrmData = 180 "Clock freq for period time, Ch 1" Bit(4) 0 0-1 Prm_Text_Ref = 43 EndExtUserPrmData ExtUserPrmData = 181 "Period nr selection, Ch 0" BitArea(1-3) 0 0-7 Prm_Text_Ref = 44 EndExtUserPrmData ExtUserPrmData = 182 "Clock freq for period time, Ch 0" Bit(0) 0 0-1 Prm_Text_Ref = 43 EndExtUserPrmData ExtUserPrmData = 183 "Start new measurement, Ch 3" Bit(3) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 184 "Start new measurement, Ch 2" Bit(2) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 185 "Start new measurement, Ch 1" Bit(1) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 186 "Start new measurement, Ch 0" Bit(0) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 187 "CHA Transduc type & Scale factor" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 188 "CHB Transduc type & Scale factor" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 191 "CHA Full scale range" BitArea(4-7) 0 0-15 Prm_Text_Ref = 46 EndExtUserPrmData ExtUserPrmData = 192 "CHB Full scale range" BitArea(4-7) 0 0-15 Prm_Text_Ref = 46 EndExtUserPrmData ExtUserPrmData = 193 "CHA Over alarm gap setpoint" BitArea(0-7) 0 0-240 EndExtUserPrmData ExtUserPrmData = 194 "CHA Under alarm gap setpoint" BitArea(0-7) 0 0-240 EndExtUserPrmData ExtUserPrmData = 195 "CHB Over alarm gap setpoint" BitArea(0-7) 0 0-240 EndExtUserPrmData ExtUserPrmData = 196 "CHB Under alarm gap setpoint" BitArea(0-7) 0 0-240 EndExtUserPrmData ExtUserPrmData = 197 "CHA Danger setpoint" BitArea(0-7) 0 0-200 EndExtUserPrmData ExtUserPrmData = 198 "CHA Alert setpoint" BitArea(0-7) 0 0-200 EndExtUserPrmData ExtUserPrmData = 199 "CHB Danger setpoint" BitArea(0-7) 0 0-200 EndExtUserPrmData ExtUserPrmData = 200 "CHB Alert setpoint" BitArea(0-7) 0 0-200 EndExtUserPrmData ExtUserPrmData = 201 "CHA HP Corner" BitArea(4-7) 0 0-13 Prm_Text_Ref = 47 EndExtUserPrmData ExtUserPrmData = 202 "CHA LP Corner" BitArea(0-3) 0 0-13 Prm_Text_Ref = 48 EndExtUserPrmData ExtUserPrmData = 203 "CHB HP Corner" BitArea(4-7) 0 0-13 Prm_Text_Ref = 47 EndExtUserPrmData ExtUserPrmData = 204 "CHB LP Corner" BitArea(0-3) 0 0-13 Prm_Text_Ref = 48 EndExtUserPrmData ExtUserPrmData = 205 "CHA Danger time delay" BitArea(4-7) 0 0-15 Prm_Text_Ref = 49 EndExtUserPrmData ExtUserPrmData = 206 "CHA Alert time delay" BitArea(0-3) 0 0-15 Prm_Text_Ref = 49 EndExtUserPrmData ExtUserPrmData = 207 "CHB Danger time delay" BitArea(4-7) 0 0-15 Prm_Text_Ref = 49 EndExtUserPrmData ExtUserPrmData = 208 "CHB Alert time delay" BitArea(0-3) 0 0-15 Prm_Text_Ref = 49 EndExtUserPrmData ExtUserPrmData = 209 "Monitor reset" Bit(7) 0 0-1 Prm_Text_Ref = 50 EndExtUserPrmData ExtUserPrmData = 210 "Barrier Configuration" BitArea(5-6) 0 0-3 Prm_Text_Ref = 51 EndExtUserPrmData ExtUserPrmData = 211 "Set configuration flag" Bit(4) 0 0-1 Prm_Text_Ref = 52 EndExtUserPrmData ExtUserPrmData = 212 "Channel A" Bit(1) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 213 "Channel B" Bit(0) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 214 "CHA Trip multiply" BitArea(6-7) 0 0-3 Prm_Text_Ref = 53 EndExtUserPrmData ExtUserPrmData = 215 "CHB Trip multiply" BitArea(4-5) 0 0-3 Prm_Text_Ref = 53 EndExtUserPrmData ExtUserPrmData = 216 "CHA trip multiply enable" Bit(3) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 217 "CHB trip multiply enable" Bit(2) 0 0-1 Prm_Text_Ref = 19 EndExtUserPrmData ExtUserPrmData = 218 "CHA Inhibit" Bit(1) 0 0-1 Prm_Text_Ref = 54 EndExtUserPrmData ExtUserPrmData = 219 "CHB Inhibit" Bit(0) 0 0-1 Prm_Text_Ref = 54 EndExtUserPrmData ExtUserPrmData = 222 "CHA Full scale range & Zero pos" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 223 "CHB Full scale range & Zero pos" Unsigned16 0 0-65535 EndExtUserPrmData ExtUserPrmData = 224 "CHA Direct over danger setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 225 "CHA Direct under danger setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 226 "CHA Direct over alert setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 227 "CHA Direct under alert setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 228 "CHB Direct over Danger setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 229 "CHB Direct under Danger setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 230 "CHB Direct over alert setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 231 "CHB Direct under alert setpoint" Unsigned8 0 0-200 EndExtUserPrmData ExtUserPrmData = 232 "CHA Upscale thrust direction" Bit(3) 0 0-1 Prm_Text_Ref = 56 EndExtUserPrmData ExtUserPrmData = 233 "CHB Upscale thrust direction" Bit(2) 0 0-1 Prm_Text_Ref = 56 EndExtUserPrmData ExtUserPrmData = 236 "CHA Full scale range" BitArea(2-7) 0 0-63 Prm_Text_Ref = 58 EndExtUserPrmData ExtUserPrmData = 237 "CHB Full scale range" BitArea(2-7) 0 0-63 Prm_Text_Ref = 58 EndExtUserPrmData ExtUserPrmData = 238 "CHA TOK" Bit(1) 0 0-1 Prm_Text_Ref = 59 EndExtUserPrmData ExtUserPrmData = 239 "CHB TOK" Bit(1) 0 0-1 Prm_Text_Ref = 59 EndExtUserPrmData ExtUserPrmData = 240 "CHA HP corner" BitArea(4-7) 0 0-15 Prm_Text_Ref = 60 EndExtUserPrmData ExtUserPrmData = 241 "CHA LP corner" BitArea(0-3) 0 0-15 Prm_Text_Ref = 61 EndExtUserPrmData ExtUserPrmData = 242 "CHB HP corner" BitArea(4-7) 0 0-15 Prm_Text_Ref = 60 EndExtUserPrmData ExtUserPrmData = 243 "CHB LP corner" BitArea(0-3) 0 0-15 Prm_Text_Ref = 61 EndExtUserPrmData ExtUserPrmdata = 246 "CHA Full scale range" BitArea(2-7) 0 0-63 Prm_Text_Ref = 63 EndExtUserPrmData ExtUserPrmData = 247 "CHB Full scale range" BitArea(2-7) 0 0-63 Prm_Text_Ref = 63 EndExtUserPrmData ExtuserPrmData = 248 "CHA HP corner, see table" BitArea(4-7) 0 0-15 EndExtUserPrmData ExtuserPrmData = 249 "CHA LP corner, see table" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtuserPrmData = 250 "CHB HP corner, see table" BitArea(4-7) 0 0-15 EndExtUserPrmData ExtUserPrmData = 251 "CHB LP corner, see table" BitArea(0-3) 0 0-15 EndExtUserPrmData ExtUserPrmdata = 252 "Monitor type selection" BitArea(2-3) 1 1-3 Prm_Text_Ref = 64 EndExtUserPrmdata ExtUserPrmData = 253 "Monitor type selection" BitArea(2-3) 1 1-1 Prm_Text_Ref = 65 EndExtUserPrmData ExtUserPrmData = 254 "Freq scaling divisor Ch 0" Unsigned8 0 0-255 EndExtUserPrmData ExtUserPrmData = 255 "Freq scaling divisor Ch 1" Unsigned8 0 0-255 EndExtUserPrmData ExtUserPrmData = 256 "Filter constants" BitArea(0-2) 0 0-7 Prm_Text_Ref = 17 EndExtUserPrmData ExtUserPrmData = 257 "Filter A0 enable" Bit(0) 0 0-1 Prm_Text_Ref = 6 EndExtUserPrmData ExtUserPrmData = 258 "Filter A1 enable" Bit(1) 0 0-1 Prm_Text_Ref = 6 EndExtUserPrmData ExtUserPrmData = 259 "Filter Constant" BitArea(0-1) 0 0-3 Prm_Text_Ref = 66 EndExtUserPrmData ;------------- ;Autoconfigure ;------------- Ext_User_Prm_Data_Const(0) = 0x00 Ext_User_Prm_Data_Ref(1) = 1 Ext_User_Prm_Data_Ref(1) = 2 Ext_User_Prm_Data_Ref(1) = 3 ; Definition of all available physical modules ;============================================= ; Flex I/O adapter status (must be the first module in config, 1 word in, 1 word out) Module = "3170-PDP Status" 0x50, 0x60 EndModule ; Definition of modules for autoconfigure ;======================================== ; Empty slot for Flex I/O (2 configuration bytes per slot) Module = "Flex I/O empty slot/Auto format" 0x00, 0x00 EndModule ; AC Modules ;-------------- ; Flex I/O module 1794-IA8, (default config= 1 word in, 1 word out) Module = "1794-IA8 / Auto format" 0x50, 0x60 EndModule ; Flex I/O module 1794-IA8I, (default config= 1 word in, 1 word out) Module = "1794-IA8I / Auto format" 0x50, 0x60 EndModule ; Flex I/O module 1794-IA16, (default config= 2 word in, 1 word out) Module = "1794-IA16 / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1794-OA8, (default config= 0 word in, 1 word out) Module = "1794-OA8 / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1794-OA8I, (default config= 0 word in, 1 word out) Module = "1794-OA8I / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1794-OA16, (default config= 1 word in, 1 word out) Module = "1794-OA16 / Auto format" 0x50, 0x61 EndModule ; Flex I/O module 1794-IM8, (default config= 2 word in, 1 word out) Module = "1794-IM8 / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1794-OM8, (default config= 1 word in, 1 word out) Module = "1794-OM8 / Auto format" 0x50, 0x61 EndModule ; DC Modules ;-------------- ; Flex I/O module 1794-IB8, (default config= 2 word in, 1 word out) Module = "1794-IB8 / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1794-IB8S, (default config= 1 word in, 1 word out) Module = "1794-IB8S / Auto format" 0x50, 0x60 EndModule ; Flex I/O module 1794-IB16, (default config= 2 word in, 1 word out) Module = "1794-IB16 / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1793-IB16/A, S/A, (default config= 2 word in, 1 word out) Module = "1793-IB16/A, S/A / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1794-IV16, (default config= 2 word in, 1 word out) Module = "1794-IV16 / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1793-IV16/A, S/A, (default config= 2 word in, 1 word out) Module = "1793-IV16/A, S/A / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1794-OB8, (default config= 0 word in, 1 word out) Module = "1794-OB8 / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1794-OB16, (default config= 0 word in, 1 word out) Module = "1794-OB16 / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1794-OB16P, (default config= 0 word in, 1 word out) Module = "1794-OB16P / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1793-OB16P/A, S/A, (default config= 0 word in, 1 word out) Module = "1793-OB16P/A, S/A / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1794-OV16, (default config= 0 word in, 1 word out) Module = "1794-OV16 / Auto format" 0x00, 0x61 EndModule ; Flex I/O module 1794-OV16P, (default config= 0 word in, 1 word out) Module = "1794-OV16P / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1793-OV16P/A, S/A, (default config= 0 word in, 1 word out) Module = "1793-OV16P/A, S/A / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1794-OB8EP, (default config= 1 word in, 2 word out) Module = "1794-OB8EP / Auto format" 0x50, 0x61 EndModule ; Flex I/O module 1794-IB10XOB6, (default config= 1 word in, 2 word out) Module = "1794-IB10XOB6 / Auto format" 0x50, 0x61 EndModule ; Flex I/O module 1794-IC16, (default config= 2 word in, 1 word out) Module = "1794-IC16 / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1794-OC16, (default config= 1 word in, 1 word out) Module = "1794-OC16 / Auto format" 0x50, 0x61 EndModule ; Flex I/O module 1793-IB4(S), (default config= 2 word in, 1 word out) Module = "1793-IB4(S) / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1793-OB4P(S), (default config= 0 word in, 1 word out) Module = "1793-OB4P(S) / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1793-IB2XOB2P(S), (default config= 1 word in, 2 word out) Module = "1793-IB2XOB2P(S) / Auto format" 0x50, 0x61 EndModule ; Flex I/O module 1794-IB32/A, (default config= 2 word in, 1 word out) Module = "1794-IB32 / Auto format" 0x51, 0x60 EndModule ; Flex I/O module 1794-OB32P, (default config= 0 word in, 2 word out) Module = "1794-OB32P / Auto format" 0x00, 0x61 EndModule ; Flex I/O module 1794-IB16XOB16P, (default config= 1 word in, 2 word out) Module = "1794-IB16XOB16P / Auto format" 0x50, 0x61 EndModule ; Analog Modules ;--------------- ; Flex I/O module 1794-IE8, (default config= 9 words in, 1 word out) Module = "1794-IE8 / Auto format" 0x58, 0x60 EndModule ; Flex I/O module 1794-OE4, (default config= 1 word in, 6 words out) Module = "1794-OE4 / Auto format" 0x50, 0x65 EndModule ; Flex I/O module 1794-IE4XOE2, (default config= 5 words in, 4 words out) Module = "1794-IE4XOE2 / Auto format" 0x54, 0x63 EndModule ; Flex I/O module 1793-IE4(S), (default config= 9 words in, 1 word out) Module = "1793-IE4(S) / Auto format" 0x58, 0x60 EndModule ; Flex I/O module 1793-OE2(S), (default config= 1 word in, 6 words out) Module = "1793-OE2(S) / Auto format" 0x50, 0x65 EndModule ; Flex I/O module 1793-IE2XOE1(S), (default config= 5 words in, 4 words out) Module = "1793-IE2XOE1(S) / Auto format" 0x54, 0x63 EndModule ; Isolated Analog Modules ;------------------------ ; Flex I/O module 1794-IF4I, (default config= 7 words in, 5 words out) Module = "1794-IF4I / Auto format" 0x56, 0x64 EndModule ; Flex I/O module 1794-OF4I, (default config= 6 words in, 7 words out) Module = "1794-OF4I / Auto format" 0x55, 0x66 EndModule ; Flex I/O module 1794-IF2XOF2I, (default config= 7 words in, 7 words out) Module = "1794-IF2XOF2I / Auto format" 0x56, 0x66 EndModule ; Relay Modules ;--------------- ; Flex I/O module 1794-OW8, (default config= 0 word in, 1 word out) Module = "1794-OW8 / Auto format" 0x00, 0x60 EndModule ; Flex I/O module 1793-OW4(S), (default config= 0 word in, 1 word out) Module = "1793-OW4(S) / Auto format" 0x00, 0x60 EndModule ; Special Modules ;--------------- ; Flex I/O module 1794-IR8, (default config= 11 words in, 3 words out) Module = "1794-IR8 / Auto format" 0x5A, 0x62 EndModule ; Flex I/O module 1794-IRT8, (default config= 11 words in, 4 words out) Module = "1794-IRT8 / Auto format" 0x5A, 0x63 EndModule ; Flex I/O module 1794-IT8, (default config= 11 words in, 3 words out) Module = "1794-IT8 / Auto format" 0x5A, 0x62 EndModule ; Flex I/O module 1794-IJ2, (default config= 7 words in, 8 words out) Module = "1794-IJ2 / Auto format" 0x56, 0x67 EndModule ; Flex I/O module 1794-ID2, (default config= 8 words in, 5 words out) Module = "1794-ID2 / Auto format" 0x57, 0x64 EndModule ; Flex I/O module 1794-IP4, (default config= 10 words in, 3 words out) Module = "1794-IP4 / Auto format" 0x59, 0x62 EndModule ; Flex I/O module 1203-FM1, (default config= 6 words in, 5 words out) Module = "1203-FM1 / Auto format" 0x55, 0x64 EndModule ; Bentley Nevada Autoc Module = "BN 1701-15 Rad Vib Mon / Auto" 0x54, 0x69 EndModule Module = "BN 1701-15 Thrust Mon / Auto" 0x54, 0x69 EndModule Module = "BN 1701-25 Vel In Mon / Auto" 0x54, 0x69 EndModule Module = "BN 1701-25 Acc In Mon / Auto" 0x54, 0x69 EndModule ; Definition of modules for condensed format ;============================================================ ; Empty slot for Flex I/O (2 configuration bytes per slot) Module = "Flex I/O empty slot/Cond format" 0x00, 0x00 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0xFF, 0xFF EndModule ; AC Modules ;-------------- ; Flex I/O module 1794-IA8, (default config= 1 word in, 1 word out) Module = "1794-IA8 / Condensed format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x85 EndModule ; Flex I/O module 1794-IA8I, (default config= 1 word in, 1 word out) Module = "1794-IA8I / Condensed format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x80 EndModule ; Flex I/O module 1794-IA16, (default config= 2 word in, 1 word out) Module = "1794-IA16 / Condensed format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x09 EndModule ; Flex I/O module 1794-OA8, (default config= 0 word in, 1 word out) Module = "1794-OA8 / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x95 EndModule ; Flex I/O module 1794-OA8I, (default config= 0 word in, 1 word out) Module = "1794-OA8I / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x9C EndModule ; Flex I/O module 1794-OA16, (default config= 1 word in, 2 word out) Module = "1794-OA16 / Condensed format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x0D EndModule ; Flex I/O module 1794-IM8, (default config= 2 word in, 1 word out) Module = "1794-IM8 / Condensed format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x05 EndModule ; Flex I/O module 1794-OM8, (default config= 1 word in, 2 word out) Module = "1794-OM8 / Condensed format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x05 EndModule ; DC Modules ;-------------- ; Flex I/O module 1794-IB8, default config= 2 word in, 1 word out) Module = "1794-IB8 / Condensed format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x80 EndModule ; Flex I/O module 1794-IB8S, default config= 1 word in, 1 word out) Module = "1794-IB8S / Condensed format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x89 EndModule ; Flex I/O module 1794-IB16, (default config= 2 word in, 1 word out) Module = "1794-IB16 / Condensed format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x81 EndModule ; Flex I/O module 1793-IB16/A, S/A, (default config= 2 word in, 1 word out) Module = "1793-IB16/A, S/A / Cond format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x0D EndModule ; Flex I/O module 1794-IV16, (default config= 2 word in, 1 word out) Module = "1794-IV16 / Condensed format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x04 EndModule ; Flex I/O module 1793-IV16/A, S/A, (default config= 2 word in, 1 word out) Module = "1793-IV16/A, S/A / Cond format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x10 EndModule ; Flex I/O module 1794-OB8, (default config= 0 word in, 1 word out) Module = "1794-OB8 / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x90 EndModule ; Flex I/O module 1794-OB16, (default config= 0 word in, 1 word out) Module = "1794-OB16 / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x91 EndModule ; Flex I/O module 1794-OB16P, (Protected) Module (default config= 0 word in, 1 word out) Module = "1794-OB16P / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x08 EndModule ; Flex I/O module 1793-OB16P/A, S/A, (Protected) Module (default config= 0 word in, 1 word out) Module = "1793-OB16P/A, S/A / Cond format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x18 EndModule ; Flex I/O module 1794-OV16, (default config= 0 word in, 2 word out) Module = "1794-OV16 / Condensed format" 0x00, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x04 EndModule ; Flex I/O module 1794-OV16P, (default config= 0 word in, 1 word out) Module = "1794-OV16P / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x09 EndModule ; Flex I/O module 1793-OV16P/A, S/A, (default config= 0 word in, 1 word out) Module = "1793-OV16P/A, S/A / Cond format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x19 EndModule ; Flex I/O module 1794-OB8EP, (default config= 1 word in, 2 word out) Module = "1794-OB8EP / Condensed format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x9D EndModule ; Flex I/O module 1794-IBI0XOB6, (default config= 1 word in, 2 word out) Module = "1794-IB10XOB6 / Condensed format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x00 EndModule ; Flex I/O module 1794-IC16, (default config= 2 word in, 1 word out) Module = "1794-IC16 / Condensed format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x08 EndModule ; Flex I/O module 1794-OC16, (default config= 1 word in, 2 word out) Module = "1794-OC16 / Condensed format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x0C EndModule ; Flex I/O module 1793-IB4(S), (default config= 2 word in, 1 word out) Module = "1793-IB4(S) / Condensed format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x0C EndModule ; Flex I/O module 1793-OB4P(S), (default config= 0 word in, 1 word out) Module = "1793-OB4P(S) / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x10 EndModule ; Flex I/O module 1793-IB2XOB2P(S), (default config= 1 word in, 2 word out) Module = "1793-IB2XOB2P(S) / Cond format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x11 EndModule ; Flex I/O module 1794-IB32/A, (default config= 2 word in, 1 word out) Module = "1794-IB32 / Cond format" 0x51, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x02, 0x11 EndModule ; Flex I/O module 1794-OB32P, (default config= 0 word in, 2 word out) Module = "1794-OB32P / Cond format" 0x00, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x00, 0x01 EndModule ; Flex I/O module 1794-IB16XOB16P, (default config= 1 word in, 2 word out) Module = "1794-IB16XOB16P / Cond format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x1C EndModule ; Analog Modules ;--------------- ; Flex I/O module 1794-IE8, (default config= 9 words in, 1 word out) Module = "1794-IE8 / Condensed format" 0x58, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x19, 0x24 EndModule ; Flex I/O module 1794-OE4, (default config= 1 word in, 6 words out) Module = "1794-OE4 / Condensed format" 0x50, 0x65 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x11, 0x25 EndModule ; Flex I/O module 1794-IE4XOE2, (default config= 5 words in, 4 words out) Module = "1794-IE4XOE2 / Condensed format" 0x54, 0x63 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x15, 0x26 EndModule ; Flex I/O module 1793-IE4(S), (default config= 9 words in, 1 word out) Module = "1793-IE4(S) / Condensed format" 0x58, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x19, 0x60 EndModule ; Flex I/O module 1793-OE2(S), (default config= 1 word in, 6 words out) Module = "1793-OE2(S) / Condensed format" 0x50, 0x65 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x11, 0x61 EndModule ; Flex I/O module 1793-IE2XOE1(S), (default config= 5 words in, 4 words out) Module = "1793-IE2XOE1(S) / Cond format" 0x54, 0x63 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x15, 0x62 EndModule ; Isolated Analog Modules ;------------------------ ; Flex I/O module 1794-IF4I, (default config= 7 words in, 5 words out) Module = "1794-IF4I / Condensed format" 0x56, 0x64 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x17, 0x20 EndModule ; Flex I/O module 1794-OF4I, (default config= 6 words in, 7 words out) Module = "1794-OF4I / Condensed format" 0x55, 0x66 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x16, 0x21 EndModule ; Flex I/O module 1794-IF2XOF2I, (default config= 7 words in, 7 words out) Module = "1794-IF2XOF2I / Condensed format" 0x56, 0x66 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x17, 0x22 EndModule ; Relay Modules ;--------------- ; Flex I/O module 1794-OW8, (default config= 0 word in, 1 word out) Module = "1794-OW8 / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x99 EndModule ; Flex I/O module 1793-OW4(S), (default config= 0 word in, 1 word out) Module = "1793-OW4(S) / Condensed format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x01, 0x15 EndModule ; Special Modules ;--------------- ; Flex I/O module 1794-IR8, (default config= 11 words in, 3 words out) Module = "1794-IR8 / Condensed format" 0x5A, 0x62 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x1B, 0x01 EndModule ; Flex I/O module 1794-IRT8, (default config= 11 words in, 4 words out) Module = "1794-IRT8 / Condensed format" 0x5A, 0x63 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x1B, 0x03 EndModule ; Flex I/O module 1794-IT8, (default config= 11 words in, 3 words out) Module = "1794-IT8 / Condensed format" 0x5A, 0x62 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x1B, 0x00 EndModule ; Flex I/O module 1794-IJ2, (default config= 7 words in, 8 words out) Module = "1794-IJ2 / Condensed format" 0x56, 0x67 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x17, 0x01 EndModule ; Flex I/O module 1794-ID2, (default config= 8 words in, 5 words out) Module = "1794-ID2 / Condensed format" 0x57, 0x64 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x18, 0x04 EndModule ; Flex I/O module 1794-IP4, (default config= 10 words in, 3 words out) Module = "1794-IP4 / Condensed format" 0x59, 0x62 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x1A, 0x00 EndModule ; Flex I/O module 1203-FM1, (default config= 6 words in, 5 words out) Module = "1203-FM1 / Condensed format" 0x55, 0x64 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x16, 0x00 EndModule ; Bentley Nevada Cond Module = "BN 1701-15 Rad Vib Mon / Cond" 0x54, 0x69 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x15, 0x01 EndModule Module = "BN 1701-15 Thrust Mon / Cond" 0x54, 0x69 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x15, 0x01 EndModule Module = "BN 1701-25 Vel In Mon / Cond" 0x54, 0x69 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x15, 0x02 EndModule Module = "BN 1701-25 Acc In Mon / Cond" 0x54, 0x69 Ext_Module_Prm_Data_Len = 2 Ext_User_Prm_Data_Const(0) = 0x15, 0x02 EndModule ; Definition of modules for full format ;============================================================ ; Empty slot for Flex I/O (2 configuration bytes per slot) Module = "Flex I/O empty slot/Full format" 0x00, 0x00 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0xFF, 0xFF, 0x00 EndModule ; AC Modules ;-------------- ; Flex I/O module 1794-IA8, (default config= 1 word in, 0 word out) Module = "1794-IA8 / Full format" 0x50, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x85, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 4 EndModule ; Flex I/O module 1794-IA8I, (default config= 1 word in, 0 word out) Module = "1794-IA8I / Full format" 0x50, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x80, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 38 EndModule ; Flex I/O module 1794-IA16, (default config= 2 word in, 0 word out) Module = "1794-IA16 / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x09, 0x10, 0x00, 0x00 ;Config word 0 Ext_User_Prm_Data_Ref(4) = 39 Ext_User_Prm_Data_Ref(4) = 40 EndModule ; Flex I/O module 1794-OA8, (default config= 0 word in, 1 word out) Module = "1794-OA8 / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x95, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(4) = 16 EndModule ; Flex I/O module 1794-OA8I, (default config= 0 word in, 1 word out) Module = "1794-OA8I / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x9C, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(4) = 16 EndModule ; Flex I/O module 1794-OA16, (default config= 1 word in, 1 word out) Module = "1794-OA16 / Full format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x0D, 0x01, 0x00, 0x00 ;Safestate word Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1794-IM8, (default config= 2 word in, 0 word out) Module = "1794-IM8 / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x05, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 41 EndModule ; Flex I/O module 1794-OM8, (default config= 1 word in, 1 word out) Module = "1794-OM8 / Full format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x05, 0x01, 0x00, 0x00 ;Safe state Ext_User_Prm_Data_Ref(4) = 16 EndModule ; Flex I/O module 1794-IB8, (default config= 2 word in, 0 word out) Module = "1794-IB8 / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x80, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 42 EndModule ; Flex I/O module 1794-IB8S, (default config= 1 word in, 0 word out) Module = "1794-IB8S / Full format" 0x50, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x89, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 5 Ext_User_Prm_Data_Ref(4) = 6 EndModule ; Flex I/O module 1794-IB16, (default config= 2 word in, 0 word out) Module = "1794-IB16 / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x81, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 5 Ext_User_Prm_Data_Ref(4) = 6 EndModule ; Flex I/O module 1793-IB16/A, S/A, (default config= 2 word in, 0 word out) Module = "1793-IB16/A, S/A / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x0D, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 5 Ext_User_Prm_Data_Ref(4) = 6 EndModule ; Flex I/O module 1794-IV16,(default config= 2 word in, 0 word out) Module = "1794-IV16 / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x04, 0x10, 0x00, 0x00 ;1 config word Ext_User_Prm_Data_Ref(3) = 42 Ext_User_Prm_Data_Ref(3) = 43 Ext_User_Prm_Data_Ref(3) = 44 EndModule ; Flex I/O module 1793-IV16/A, S/A,(default config= 2 word in, 0 word out) Module = "1793-IV16/A, S/A / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x10, 0x10, 0x00, 0x00 ;1 config word Ext_User_Prm_Data_Ref(3) = 42 Ext_User_Prm_Data_Ref(3) = 43 Ext_User_Prm_Data_Ref(3) = 44 EndModule ; Flex I/O module 1794-OB8, (default config= 0 word in, 1 word out) Module = "1794-OB8 / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x90, 0x01, 0x00, 0x00 ;SS1 Ext_User_Prm_Data_Ref(4) = 16 EndModule ; Flex I/O module 1794-OB16, (default config= 0 word in, 1 word out) Module = "1794-OB16 / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x91, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1794-OB16P, (default config= 0 word in, 1 word out) Module = "1794-OB16P / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x08, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1793-OB16P/A, S/A, (default config= 0 word in, 1 word out) Module = "1793-OB16P/A, S/A / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x18, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ;Flex I/O module 1794-OV16, (default config= 0 word in, 1 word out) Module = "1794-OV16 / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x04, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1794-OV16P, (default config= 0 word in, 1 word out) Module = "1794-OV16P / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x09, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1793-OV16P/A, S/A, (default config= 0 word in, 1 word out) Module = "1793-OV16P/A, S/A / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x19, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1794-OB8EP, (default config= 1 word in, 2 word out) Module = "1794-OB8EP / Full format" 0x50, 0x61 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x9D, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1794-IBI0XOB6, (default config= 1 word in, 1 word out) Module = "1794-IB10XOB6 / Full format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 7 Ext_User_Prm_Data_Const(0) = 0x01, 0x00, 0x11, 0x00, 0x00, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(4) = 16 ;Config word 1 Ext_User_Prm_Data_Ref(5) = 45 EndModule ; Flex I/O module 1794-IC16, (default config= 2 word in, 0 word out) Module = "1794-IC16 / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x08, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 45 Ext_User_Prm_Data_Ref(4) = 46 EndModule ; Flex I/O module 1794-OC16, (default config= 1 word in, 1 word out) Module = "1794-OC16 / Full format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x0C, 0x01, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 EndModule ; Flex I/O module 1793-IB4(S), (default config= 2 word in, 0 word out) Module = "1793-IB4(S) / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x0C, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 47 EndModule ; Flex I/O module 1793-OB4P(S), (default config= 0 word in, 1 word out) Module = "1793-OB4P(S) / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x10, 0x01, 0x00, 0x00 ;Safe state word Ext_User_Prm_Data_Ref(4) = 48 EndModule ; Flex I/O module 1793-IB2XOB2P(S), (default config= 1 word in, 2 word out) Module = "1793-IB2XOB2P(S) / Full format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 7 Ext_User_Prm_Data_Const(0) = 0x01, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(4) = 49 ;Config word 1 Ext_User_Prm_Data_Ref(6) = 50 EndModule ; Flex I/O module 1794-IB32/A, (default config= 2 word in, 0 word out) Module = "1794-IB32 / Full format" 0x51, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x02, 0x11, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(4) = 256; EndModule ; Flex I/O module 1794-OB32P, (default config= 0 word in, 2 word out) Module = "1794-OB32P / Full format" 0x00, 0x61 Ext_Module_Prm_Data_Len = 7 Ext_User_Prm_Data_Const(0) = 0x00, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00 ; 2 Safe state words Ext_User_Prm_Data_Ref(3) = 7; Ext_User_Prm_Data_Ref(5) = 8; EndModule ; Flex I/O module 1794-IB16XOB16P, (default config= 1 word in, 1 word out) Module = "1794-IB16XOB16P / Full format" 0x50, 0x60 Ext_Module_Prm_Data_Len = 7 Ext_User_Prm_Data_Const(0) = 0x01, 0x1C, 0x11, 0x00, 0x00, 0x00, 0x00 ; 1 Safe state word Ext_User_Prm_Data_Ref(3) = 7; ; 1 Config word Ext_User_Prm_Data_Ref(6) = 256; EndModule ; Flex I/O module 1794-IE8, (default config= 9 words in, 0 word out) Module = "1794-IE8 / Full format" 0x58, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x19, 0x24, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(3) = 11 EndModule ; Flex I/O module 1794-OE4, (default config= 1 word in, 4 words out) Module = "1794-OE4 / Full format" 0x50, 0x63 Ext_Module_Prm_Data_Len = 15 Ext_User_Prm_Data_Const(0) = 0x11, 0x25, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 ; Safe state word 1-4 Ext_User_Prm_Data_Ref(3) = 7 Ext_User_Prm_Data_Ref(5) = 8 Ext_User_Prm_Data_Ref(7) = 9 Ext_User_Prm_Data_Ref(9) = 10 ;Config word 1 Ext_User_Prm_Data_Ref(12) = 12 Ext_User_Prm_Data_Ref(12) = 13 Ext_User_Prm_Data_Ref(12) = 14 Ext_User_Prm_Data_Ref(12) = 15 ;Config word 2 Ext_User_Prm_Data_Ref(13) = 11 EndModule ; Flex I/O module 1794-IE4XOE2, (default config= 5 words in, 2 words out) Module = "1794-IE4XOE2 / Full format" 0x54, 0x61 Ext_Module_Prm_Data_Len = 11 Ext_User_Prm_Data_Const(0) = 0x15, 0x26, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00 ;Safe state word 1-2 Ext_User_Prm_Data_Ref(3) = 7 Ext_User_Prm_Data_Ref(5) = 8 ;Config word 1 Ext_User_Prm_Data_Ref(8) = 12 Ext_User_Prm_Data_Ref(8) = 13 ;Config word 2 Ext_User_Prm_Data_Ref(9) = 11 EndModule ; Flex I/O module 1793-IE4(S), (default config= 9 words in, 0 word out) Module = "1793-IE4(S) / Full format" 0x58, 0x00 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x19, 0x60, 0x10, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(3) = 52 Ext_User_Prm_Data_Ref(4) = 51 EndModule ; Flex I/O module 1793-OE2(S), (default config= 1 word in, 6 words out) Module = "1793-OE2(S) / Full format" 0x50, 0x63 Ext_Module_Prm_Data_Len = 11 Ext_User_Prm_Data_Const(0) = 0x11, 0x61, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00 ;Safe state word 1-2 Ext_User_Prm_Data_Ref(3) = 7 Ext_User_Prm_Data_Ref(5) = 8 ;Config word 1 Ext_User_Prm_Data_Ref(8) = 53 ;Config word 2 Ext_User_Prm_Data_Ref(9) = 54 Ext_User_Prm_Data_Ref(10) = 55 EndModule ; Flex I/O module 1793-IE2XOE1(S), (default config= 5 words in, 2 words out) Module = "1793-IE2XOE1(S) / Full format" 0x54, 0x61 Ext_Module_Prm_Data_Len = 9 Ext_User_Prm_Data_Const(0) = 0x15, 0x62, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00 ;Safe state word 1 Ext_User_Prm_Data_Ref(3) = 7 ;Config word 1 Ext_User_Prm_Data_Ref(6) = 56 ;Config word 2 Ext_User_Prm_Data_Ref(7) = 57 Ext_User_Prm_Data_Ref(8) = 58 EndModule ; Isolated Analog Modules ;------------------------ ; Flex I/O module 1794-IF4I, (default config= 7 words in, 0 words out) Module = "1794-IF4I / Full format" 0x56, 0x00 Ext_Module_Prm_Data_Len = 13 Ext_User_Prm_Data_Const(0) = 0x17, 0x20, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x00, 0x00 ;Config word 2 - Chnl filter Ext_User_Prm_Data_Ref(5) = 59 ;Config word 3 - Chnl Config Ext_User_Prm_Data_Ref(7) = 60 ;Config word 4 - RT sample interval Ext_User_Prm_Data_Ref(9) = 61 ;Config word 5 Ext_User_Prm_Data_Ref(11) = 73 Ext_User_Prm_Data_Ref(11) = 62 Ext_User_Prm_Data_Ref(11) = 63 Ext_User_Prm_Data_Ref(11) = 64 ;Interrupt toggle bit Ext_User_Prm_Data_Ref(12) = 65 ;Revert to def bit Ext_User_Prm_Data_Ref(12) = 66 Ext_User_Prm_Data_Ref(12) = 67 Ext_User_Prm_Data_Ref(12) = 68 Ext_User_Prm_Data_Ref(12) = 69 Ext_User_Prm_Data_Ref(12) = 70 Ext_User_Prm_Data_Ref(12) = 71 Ext_User_Prm_Data_Ref(12) = 72 ;Ch 3 EndModule ; Flex I/O module 1794-OF4I, (default config= 6 words in, 5 words out) Module = "1794-OF4I / Full format" 0x55, 0x64 Ext_Module_Prm_Data_Len = 15 Ext_User_Prm_Data_Const(0) = 0x16, 0x21, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 ;Safe state word 1-4 Ext_User_Prm_Data_Ref(3) = 7 ;SS 1 Ext_User_Prm_Data_Ref(5) = 8 Ext_User_Prm_Data_Ref(7) = 9 Ext_User_Prm_Data_Ref(9) = 10 ;SS 4 ;Config word 1 Ext_User_Prm_Data_Ref(11) = 60 ;Channel 3,2,1,0 Configuration ;Config word 2 Ext_User_Prm_Data_Ref(13) = 62 ;Initiate conf bit Ext_User_Prm_Data_Ref(13) = 73 Ext_User_Prm_Data_Ref(13) = 63 Ext_User_Prm_Data_Ref(13) = 64 Ext_User_Prm_Data_Ref(13) = 77 Ext_User_Prm_Data_Ref(13) = 76 Ext_User_Prm_Data_Ref(13) = 75 Ext_User_Prm_Data_Ref(13) = 74 ;Req for outputs to hold 0 Ext_User_Prm_Data_Ref(14) = 65 ;Revert to def Ext_User_Prm_Data_Ref(14) = 66 Ext_User_Prm_Data_Ref(14) = 67 Ext_User_Prm_Data_Ref(14) = 68 Ext_User_Prm_Data_Ref(14) = 72 Ext_User_Prm_Data_Ref(14) = 71 Ext_User_Prm_Data_Ref(14) = 70 Ext_User_Prm_Data_Ref(14) = 69 ;Enable channel nr 0 EndModule ; Flex I/O module 1794-IF2XOF2I, (default config= 7 words in, 3 words out) Module = "1794-IF2XOF2I / Full format" 0x56, 0x62 Ext_Module_Prm_Data_Len = 15 Ext_User_Prm_Data_Const(0) = 0x17, 0x22, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 ;Safe state wor 1-2 Ext_User_Prm_Data_Ref(3) = 7 Ext_User_Prm_Data_Ref(5) = 8 ;Config word Ext_User_Prm_Data_Ref(8) = 78 ;Input ch 1 filter Ext_User_Prm_Data_Ref(8) = 79 ;ch 0 ;Config word 2 Ext_User_Prm_Data_Ref(9) = 80 ;Output channel 1 conf Ext_User_Prm_Data_Ref(9) = 81 Ext_User_Prm_Data_Ref(10) = 82 Ext_User_Prm_Data_Ref(10) = 83 ;Input channel 0 conf ;Config word 3 Ext_User_Prm_Data_Ref(11) = 61 ;Real time sample programmed interval ;Config word 4 Ext_User_Prm_Data_Ref(13) = 62 ;Initiate configuration Ext_User_Prm_Data_Ref(13) = 73 Ext_User_Prm_Data_Ref(13) = 63 Ext_User_Prm_Data_Ref(13) = 64 Ext_User_Prm_Data_Ref(13) = 88 Ext_User_Prm_Data_Ref(13) = 89 ;Req output 0 to hold Ext_User_Prm_Data_Ref(14) = 65 ;Revert to defaults Ext_User_Prm_Data_Ref(14) = 66 Ext_User_Prm_Data_Ref(14) = 67 Ext_User_Prm_Data_Ref(14) = 68 Ext_User_Prm_Data_Ref(14) = 87 Ext_User_Prm_Data_Ref(14) = 86 Ext_User_Prm_Data_Ref(14) = 85 Ext_User_Prm_Data_Ref(14) = 84 ;Enable Input 0 EndModule ; Flex I/O module 1794-OW8, (default config= 0 word in, 1 word out) Module = "1794-OW8 / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x99, 0x01, 0x00, 0x00 ;1 safe state word ;SS Ext_User_Prm_Data_Ref(4) = 16 ;No config EndModule ; Flex I/O module 1793-OW4(S), (default config= 0 word in, 1 word out) Module = "1793-OW4(S) / Full format" 0x00, 0x60 Ext_Module_Prm_Data_Len = 5 Ext_User_Prm_Data_Const(0) = 0x01, 0x15, 0x01, 0x00, 0x00 ;SS word 1 Ext_User_Prm_Data_Ref(4) = 48 ;4 lsb bits in low byte EndModule ; Flex I/O module 1794-IR8, (default config= 11 words in, 0 words out) Module = "1794-IR8 / Full format" 0x5A, 0x00 Ext_Module_Prm_Data_Len = 9 Ext_User_Prm_Data_Const(0) = 0x1B, 0x01, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00 ;Config word1 Ext_User_Prm_Data_Ref(3) = 17 ;8 bit mask Ext_User_Prm_Data_Ref(4) = 91 Ext_User_Prm_Data_Ref(4) = 90 Ext_User_Prm_Data_Ref(4) = 18 Ext_User_Prm_Data_Ref(4) = 19 Ext_User_Prm_Data_Ref(4) = 20 ;MDT ;Config word2 Ext_User_Prm_Data_Ref(5) = 24 Ext_User_Prm_Data_Ref(5) = 23 Ext_User_Prm_Data_Ref(6) = 22 Ext_User_Prm_Data_Ref(6) = 21 ;Config word3 Ext_User_Prm_Data_Ref(7) = 28 Ext_User_Prm_Data_Ref(7) = 27 Ext_User_Prm_Data_Ref(8) = 26 Ext_User_Prm_Data_Ref(8) = 25 EndModule ; Flex I/O module 1794-IRT8, (default config= 11 words in, 0 words out) Module = "1794-IRT8 / Full format" 0x5A, 0x00 Ext_Module_Prm_Data_Len = 11 Ext_User_Prm_Data_Const(0) = 0x1B, 0x03, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(3) = 92 ;Data format Ext_User_Prm_Data_Ref(4) = 93 Ext_User_Prm_Data_Ref(4) = 94 Ext_User_Prm_Data_Ref(4) = 95 Ext_User_Prm_Data_Ref(4) = 96 ;Filter cut-off ;Config word 2 Ext_User_Prm_Data_Ref(5) = 97 ;High byte - TC/RTD 4-7 Ext_User_Prm_Data_Ref(5) = 99 Ext_User_Prm_Data_Ref(5) = 101 Ext_User_Prm_Data_Ref(6) = 98 Ext_User_Prm_Data_Ref(6) = 100 Ext_User_Prm_Data_Ref(6) = 102 ;Sensor type 0-3 ;Config word 3 Ext_User_Prm_Data_Ref(7) = 103 ;RTD offset ch 7 Ext_User_Prm_Data_Ref(7) = 104 Ext_User_Prm_Data_Ref(7) = 105 Ext_User_Prm_Data_Ref(7) = 106 Ext_User_Prm_Data_Ref(8) = 107 Ext_User_Prm_Data_Ref(8) = 108 Ext_User_Prm_Data_Ref(8) = 109 Ext_User_Prm_Data_Ref(8) = 110 ;RTD offset ch 0 ;Config word 4 Ext_User_Prm_Data_Ref(9) = 111 ;EDT cw EndModule ; Flex I/O module 1794-IT8, (default config= 11 words in, 0 words out) Module = "1794-IT8 / Full format" 0x5A, 0x00 Ext_Module_Prm_Data_Len = 9 Ext_User_Prm_Data_Const(0) = 0x1B, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(3) = 17 ;Cal mask Ext_User_Prm_Data_Ref(4) = 91 Ext_User_Prm_Data_Ref(4) = 90 Ext_User_Prm_Data_Ref(4) = 18 Ext_User_Prm_Data_Ref(4) = 29 Ext_User_Prm_Data_Ref(4) = 20 ;MDT ;Config word 2 Ext_User_Prm_Data_Ref(5) = 33 Ext_User_Prm_Data_Ref(5) = 32 Ext_User_Prm_Data_Ref(6) = 31 Ext_User_Prm_Data_Ref(6) = 30 ;Config word 3 Ext_User_Prm_Data_Ref(7) = 37 Ext_User_Prm_Data_Ref(7) = 36 Ext_User_Prm_Data_Ref(8) = 35 Ext_User_Prm_Data_Ref(8) = 34 EndModule ; Flex I/O module 1794-IJ2, (default config= 7 words in, 8 words out) Module = "1794-IJ2 / Full format" 0x56, 0x00 Ext_Module_Prm_Data_Len = 19 Ext_User_Prm_Data_Const(0) = 0x17, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00 ;Config word 0 Ext_User_Prm_Data_Ref(3) = 112 ;Communication fault Ext_User_Prm_Data_Ref(3) = 113 Ext_User_Prm_Data_Ref(3) = 114 Ext_User_Prm_Data_Ref(3) = 116 Ext_User_Prm_Data_Ref(3) = 118 Ext_User_Prm_Data_Ref(4) = 120 Ext_User_Prm_Data_Ref(4) = 115 Ext_User_Prm_Data_Ref(4) = 117 Ext_User_Prm_Data_Ref(4) = 119 ;Missing pulse multiplier ch 1 ;Config word 1 Ext_User_Prm_Data_Ref(5) = 121 ;Max frequency ch 0 ;Config word 2 Ext_User_Prm_Data_Ref(7) = 254 ;Frequency scaling ch 0 Ext_User_Prm_Data_Ref(8) = 123 ;Config word 3 Ext_User_Prm_Data_Ref(9) = 125 ;Wire off fault select GI Ext_User_Prm_Data_Ref(9) = 127 Ext_User_Prm_Data_Ref(9) = 129 Ext_User_Prm_Data_Ref(9) = 131 Ext_User_Prm_Data_Ref(9) = 133 Ext_User_Prm_Data_Ref(10) = 135 Ext_User_Prm_Data_Ref(10) = 137 Ext_User_Prm_Data_Ref(10) = 139 Ext_User_Prm_Data_Ref(10) = 141 Ext_User_Prm_Data_Ref(10) = 143 ;Wire-off/Missing pulse fault select mode ;Config word 4 Ext_User_Prm_Data_Ref(11) = 122 ;Max frequency ch 1 ;Config word 5 Ext_User_Prm_Data_Ref(13) = 255 ;Frequency scaling ch 1 Ext_User_Prm_Data_Ref(14) = 124 ;Config word 6 Ext_User_Prm_Data_Ref(15) = 126 ;Wire off fault select GI Ext_User_Prm_Data_Ref(15) = 128 Ext_User_Prm_Data_Ref(15) = 130 Ext_User_Prm_Data_Ref(15) = 132 Ext_User_Prm_Data_Ref(15) = 134 Ext_User_Prm_Data_Ref(16) = 136 Ext_User_Prm_Data_Ref(16) = 138 Ext_User_Prm_Data_Ref(16) = 140 Ext_User_Prm_Data_Ref(16) = 142 Ext_User_Prm_Data_Ref(16) = 144 ;Wire-off/Missing pulse fault select mode EndModule ; Flex I/O module 1794-ID2, (default config= 8 words in, 5 words out) Module = "1794-ID2 / Full format" 0x57, 0x00 Ext_Module_Prm_Data_Len = 13 Ext_User_Prm_Data_Const(0) = 0x18, 0x04, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x00, 0x00 ;Config word 1 Ext_User_Prm_Data_Ref(3) = 145 ;Preset reset bit - High byte Ext_User_Prm_Data_Ref(3) = 146 Ext_User_Prm_Data_Ref(3) = 147 Ext_User_Prm_Data_Ref(3) = 148 Ext_User_Prm_Data_Ref(3) = 149 Ext_User_Prm_Data_Ref(3) = 150 Ext_User_Prm_Data_Ref(4) = 151 Ext_User_Prm_Data_Ref(4) = 152 Ext_User_Prm_Data_Ref(4) = 153 Ext_User_Prm_Data_Ref(4) = 154 Ext_User_Prm_Data_Ref(4) = 155 Ext_User_Prm_Data_Ref(4) = 156 ;Mode selection ;Config word 2 Ext_User_Prm_Data_Ref(5) = 157 ;Preset reset bit Ext_User_Prm_Data_Ref(5) = 158 Ext_User_Prm_Data_Ref(5) = 159 Ext_User_Prm_Data_Ref(5) = 160 Ext_User_Prm_Data_Ref(5) = 161 Ext_User_Prm_Data_Ref(5) = 162 Ext_User_Prm_Data_Ref(6) = 163 Ext_User_Prm_Data_Ref(6) = 164 Ext_User_Prm_Data_Ref(6) = 165 Ext_User_Prm_Data_Ref(6) = 166 Ext_User_Prm_Data_Ref(6) = 167 Ext_User_Prm_Data_Ref(6) = 168 ;Mode selection ;Config word 3 Ext_User_Prm_Data_Ref(7) = 169 ;Config word 4 Ext_User_Prm_Data_Ref(9) = 170 ;Config Word 5 Ext_User_Prm_Data_Ref(11) = 259 ;Filter Constants Ext_User_Prm_Data_Ref(12) = 257 ;Filter A0 Enable Ext_User_Prm_Data_Ref(12) = 258 ;Filter A1 Enable EndModule ; Flex I/O module 1794-IP4, (default config= 10 words in, 0 words out) Module = "1794-IP4 / Full format" 0x59, 0x00 Ext_Module_Prm_Data_Len = 9 Ext_User_Prm_Data_Const(0) = 0x1A, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00 ;3 config words ;Config word 1 Ext_User_Prm_Data_Ref(4) = 171 ;Pulse counting and period time measure ch 3 Ext_User_Prm_Data_Ref(4) = 172 Ext_User_Prm_Data_Ref(4) = 173 Ext_User_Prm_Data_Ref(4) = 174 ;PCAPTM ch 0 ;Config word 2 Ext_User_Prm_Data_Ref(5) = 175 ;Number of periods sel Ch 3 Ext_User_Prm_Data_Ref(5) = 176 ;Clock freq Ch3 Ext_User_Prm_Data_Ref(5) = 177 Ext_User_Prm_Data_Ref(5) = 178 Ext_User_Prm_Data_Ref(6) = 179 Ext_User_Prm_Data_Ref(6) = 180 Ext_User_Prm_Data_Ref(6) = 181 Ext_User_Prm_Data_Ref(6) = 182 ;Clock freq Ch0 ;Config word 3 Ext_User_Prm_Data_Ref(8) = 183 ;Start new measure Ch 3 Ext_User_Prm_Data_Ref(8) = 184 Ext_User_Prm_Data_Ref(8) = 185 Ext_User_Prm_Data_Ref(8) = 186 ;Start new measure Ch 0 - Low byte EndModule ; Flex I/O module 1203-FM1, 24V dc SCANport Module (default config= 6 words in, 5 words out) Module = "1203-FM1 / Full format" 0x55, 0x64 Ext_Module_Prm_Data_Len = 3 Ext_User_Prm_Data_Const(0) = 0x16, 0x00, 0x00 EndModule Module = "BN 1701-15 Rad Vib Mon / Full" 0x54, 0x60 Ext_Module_Prm_Data_Len = 23 Ext_User_Prm_Data_Const(0) = 0x15, 0x01, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 ;10(A) config words, 0 safe state words. ;Config word1 Ext_User_Prm_Data_Ref(3) = 187 ;Config word2 Ext_User_Prm_Data_Ref(5) = 188 ;Config word3 Ext_User_Prm_Data_Ref(7) = 191 Ext_User_Prm_Data_Ref(8) = 193 ;Config word4 Ext_User_Prm_Data_Ref(9) = 192 Ext_User_Prm_Data_Ref(10) = 194 ;Config word5 Ext_User_Prm_Data_Ref(11) = 195 Ext_User_Prm_Data_Ref(12) = 196 ;Config word6 Ext_User_Prm_Data_Ref(13) = 197 Ext_User_Prm_Data_Ref(14) = 198 ;Config word7 Ext_User_Prm_Data_Ref(15) = 199 Ext_User_Prm_Data_Ref(16) = 200 ;Config word8 Ext_User_Prm_Data_Ref(17) = 201 Ext_User_Prm_Data_Ref(17) = 202 Ext_User_Prm_Data_Ref(18) = 203 Ext_User_Prm_Data_Ref(18) = 204 ;Config word9 Ext_User_Prm_Data_Ref(19) = 205 Ext_User_Prm_Data_Ref(19) = 206 Ext_User_Prm_Data_Ref(20) = 207 Ext_User_Prm_Data_Ref(20) = 208 ;Config word10 Ext_User_Prm_Data_Ref(21) = 209 Ext_User_Prm_Data_Ref(21) = 210 Ext_User_Prm_Data_Ref(21) = 211 Ext_User_Prm_Data_Ref(21) = 212 Ext_User_Prm_Data_Ref(21) = 213 Ext_User_Prm_Data_Ref(22) = 214 Ext_User_Prm_Data_Ref(22) = 215 Ext_User_Prm_Data_Ref(22) = 216 Ext_User_Prm_Data_Ref(22) = 217 Ext_User_Prm_Data_Ref(22) = 218 Ext_User_Prm_Data_Ref(22) = 219 EndModule Module = "BN 1701-15 Thrust Mon / Full" 0x54, 0x60 Ext_Module_Prm_Data_Len = 23 Ext_User_Prm_Data_Const(0) = 0x15, 0x01, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00 ;10(A) config words, 0 safe state words. ;Config word1 Ext_User_Prm_Data_Ref(3) = 187 ;Config word2 Ext_User_Prm_Data_Ref(5) = 188 ;Config word3 Ext_User_Prm_Data_Ref(7) = 222 ;Config word4 Ext_User_Prm_Data_Ref(9) = 223 ;Config word5 Ext_User_Prm_Data_Ref(11) = 224 Ext_User_Prm_Data_Ref(12) = 225 ;Config word6 Ext_User_Prm_Data_Ref(13) = 226 Ext_User_Prm_Data_Ref(14) = 227 ;Config word7 Ext_User_Prm_Data_Ref(15) = 228 Ext_User_Prm_Data_Ref(16) = 229 ;Config word8 Ext_User_Prm_Data_Ref(17) = 230 Ext_User_Prm_Data_Ref(18) = 231 ;Config word9 Ext_User_Prm_Data_Ref(19) = 205 Ext_User_Prm_Data_Ref(19) = 206 Ext_User_Prm_Data_Ref(20) = 207 Ext_User_Prm_Data_Ref(20) = 208 ;Config word10 Ext_User_Prm_Data_Ref(21) = 209 Ext_User_Prm_Data_Ref(21) = 210 Ext_User_Prm_Data_Ref(21) = 211 Ext_User_Prm_Data_Ref(21) = 253 Ext_User_Prm_Data_Ref(21) = 212 Ext_User_Prm_Data_Ref(21) = 213 Ext_User_Prm_Data_Ref(22) = 232 Ext_User_Prm_Data_Ref(22) = 233 Ext_User_Prm_Data_Ref(22) = 218 Ext_User_Prm_Data_Ref(22) = 219 EndModule Module = "BN 1701-25 Vel In Mon / Full" 0x54, 0x60 Ext_Module_Prm_Data_Len = 23 Ext_User_Prm_Data_Const(0) = 0x15, 0x02, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 ;10(A) config words. ;Config word1 Ext_User_Prm_Data_Ref(3) = 187 ;Config word2 Ext_User_Prm_Data_Ref(5) = 188 ;Config word3 Ext_User_Prm_Data_Ref(7) = 236 Ext_User_Prm_Data_Ref(7) = 238 ;Config word4 Ext_User_Prm_Data_Ref(9) = 237 Ext_User_Prm_Data_Ref(9) = 239 ;Config word6 Ext_User_Prm_Data_Ref(13) = 197 Ext_User_Prm_Data_Ref(14) = 198 ;Config word7 Ext_User_Prm_Data_Ref(15) = 199 Ext_User_Prm_Data_Ref(16) = 200 ;Config word8 Ext_User_Prm_Data_Ref(17) = 240 Ext_User_Prm_Data_Ref(17) = 241 Ext_User_Prm_Data_Ref(18) = 242 Ext_User_Prm_Data_Ref(18) = 243 ;Config word9 Ext_User_Prm_Data_Ref(19) = 205 Ext_User_Prm_Data_Ref(19) = 206 Ext_User_Prm_Data_Ref(20) = 207 Ext_User_Prm_Data_Ref(20) = 208 ;Config word10 Ext_User_Prm_Data_Ref(21) = 209 Ext_User_Prm_Data_Ref(21) = 210 Ext_User_Prm_Data_Ref(21) = 211 Ext_User_Prm_Data_Ref(21) = 212 Ext_User_Prm_Data_Ref(21) = 213 Ext_User_Prm_Data_Ref(22) = 214 Ext_User_Prm_Data_Ref(22) = 215 Ext_User_Prm_Data_Ref(22) = 216 Ext_User_Prm_Data_Ref(22) = 217 Ext_User_Prm_Data_Ref(22) = 218 Ext_User_Prm_Data_Ref(22) = 219 EndModule Module = "BN 1701-25 Acc In Mon / Full" 0x54, 0x60 Ext_Module_Prm_Data_Len = 23 Ext_User_Prm_Data_Const(0) = 0x15, 0x02, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 ;10(A) config words ;Config word1 Ext_User_Prm_Data_Ref(3) = 187 ;Config word2 Ext_User_Prm_Data_Ref(5) = 188 ;Config word3 Ext_User_Prm_Data_Ref(7) = 246 Ext_User_Prm_Data_Ref(7) = 238 ;Config word4 Ext_User_Prm_Data_Ref(9) = 247 Ext_User_Prm_Data_Ref(9) = 239 ;Config word6 Ext_User_Prm_Data_Ref(13) = 197 Ext_User_Prm_Data_Ref(14) = 198 ;Config word7 Ext_User_Prm_Data_Ref(15) = 199 Ext_User_Prm_Data_Ref(16) = 200 ;Config word8 Ext_User_Prm_Data_Ref(17) = 248 Ext_User_Prm_Data_Ref(17) = 249 Ext_User_Prm_Data_Ref(18) = 250 Ext_User_Prm_Data_Ref(18) = 251 ;Config word9 Ext_User_Prm_Data_Ref(19) = 205 Ext_User_Prm_Data_Ref(19) = 206 Ext_User_Prm_Data_Ref(20) = 207 Ext_User_Prm_Data_Ref(20) = 208 ;Config word10 Ext_User_Prm_Data_Ref(21) = 209 Ext_User_Prm_Data_Ref(21) = 210 Ext_User_Prm_Data_Ref(21) = 211 Ext_User_Prm_Data_Ref(21) = 252 Ext_User_Prm_Data_Ref(21) = 212 Ext_User_Prm_Data_Ref(21) = 213 Ext_User_Prm_Data_Ref(22) = 214 Ext_User_Prm_Data_Ref(22) = 215 Ext_User_Prm_Data_Ref(22) = 216 Ext_User_Prm_Data_Ref(22) = 217 Ext_User_Prm_Data_Ref(22) = 218 Ext_User_Prm_Data_Ref(22) = 219 EndModule