High Speed Wireless EtherNet/IP Communication Module
MVI56-WA-EIP
The In-Chassis High Speed Wireless EtherNet/IP Communication Module creates a powerful wireless connection between your PC or Laptop and a remote ControlLogix processor. The bridging functionality allows access to other processors in other racks through different networks, using RSLinx, RSLogix, RSView or RSNetWorx. The module emulates similar 1756-ENBT Ethernet module features when used with PC (RSLinx) to processor communications.
Features and Benefits
Wireless EIP communications extend and enhance ProSoft Technology's range of wireless products. The MVI56-WA-EIP allows PC to ControlLogix processor communications using an 802.11 wireless network. The module acts as a server to RSLinx based connected services bridged between a ControlLogix processor and PC running RSLinx.
MVI56-WA-EIP is capable of supporting up to 10 distinct clients, explicit, unconnected messaging only. Thre are 20 types of read/write message capabilities, including CIP, SLC and PLC5.
The module allows for multiple programs including RSLogix 5000 to communicate simultaneously to the processor. The 802.11 wireless networks can be set up for PC to Wireless Router (infrastructure) or PC to PC (Ad hoc) modes of communications.
Applications
The MVI56-WA-EIP module provides users with wireless ControlLogix bridge functionality. With the MVI56-WA-EIP Module, you can communicate over wireless Ethernet from your PC to any ControlLogix chassis. Use the MVI56-WA-EIP module to connect PC and Laptops running RSLinx. Connect online with your processor using RSLogix or RSView (RSView 32 or RSView SE). Configure your ControlNet or DeviceNet networks with RSNetWorx.
General Specifications
- Single-slot - 1756 backplane compatible
- PC to processor communication (RSLinx version 2.51 or newer)
- The module is recognized as a 1756-ENBT/A Communication Module
- Configuration data obtained from configuration text file downloaded to module. Sample configuration file included
- Reside in Local or Remote chassis and function as a bridge to a ControlLogix processor
- Supports ad-hoc or infrastructure modes.
- Supports up to 20 simultaneous connections.
Hardware Specifications
|
Specification
|
Description
|
|
Backplane Current Load
|
800 mA @ 5 V DC;
3mA @ 24V DC
|
|
Operating Temperature
|
0 to 60° C (32 to 140° F)
|
|
Storage Temperature
|
-40 to 85° C (-40 to 185° F)
|
|
Shock:
|
30g Operational
50g non-operational
Vibration: 5g from 10 to 150 Hz
|
|
Relative Humidity
|
5% to 95% (non-condensing)
|
|
LED Indicators:
|
RF Signal Level
RF Data Status
RF Link Status
Serial Activity
|
|
Debug/Configuration port (CFG)
|
|
CFG Port (CFG)
|
RJ45 (DB-9M with supplied cable)
RS-232 only
|
|
Shipped with Unit
|
RJ45 to DB-9M cables for each port
6-foot RS-232 configuration cable
5dbi Omni Articulating Antenna
|
Functional Specifications
- PC to PLC communications
- RSView (RSView 32 and RSView SE) are supported
- PLC to PLC communications is supported for explicit messaging as a server
- Program different processors in different racks with the bridging functionality
General Radio Specifications
|
Specification
|
Value
|
|
Frequency
|
2.4 GHz band (2400 to 2483.5 MHz)*
|
|
Wireless medium
|
DSSS - Direct Sequence Spread Spectrum (802.11b)
|
|
Output power
|
32 mW (15 dBm)
|
|
Channel data rates
|
11, 5.5, 2, 1 Mbps
|
|
Channels - user selectable
|
1 through 11* **
|
|
Receive Sensitivity
|
-83 @ 11 Mbps
-86 @ 5.5 Mbps
-89 @ 2 Mbps
-92 @ 1 Mbps
|
|
Security
|
WEP 64/128 Encryption
|
|
Antenna Ports
|
Two RP-SMA connectors, automatic antenna diversity
|
|
Bit Error Rate (BER)
|
Better than 10-5
|
General range guidelines (actual results may vary)
* Varies with country regulation
** Some European countries such as France allow fewer channels
Ordering Information
| MVI56-WA-EIP |
High Speed Wireless EtherNet/IP Communication Module |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
