Product Name |
Product Number |
|
'C' Programmable Communications Module
|
MVI71-ADM
|
The MVI71 Application Development Module is a FLEX backplane compatible module that allows user-developed "C" applications to operate on the PLC platform. A great way to speed up custom ASCII data communications or to protect a proprietary algorithm, the ADM is a powerful tool for the PLC platform.
|
|
'C' Programmable Communications Module with Ethernet
|
MVI71-ADMNET
|
The MVI71 Application Development Module with Ethernet is a PLC backplane compatible module that allows Rockwell Automation PLC processors to interface easily with Ethernet protocol (Explicit Messaging) compatible devices and hosts. Devices commonly supporting the protocol include Rockwell Automation PLCs, and host HMI systems.
|
|
DF1 Half/Full Duplex Communications Module
|
MVI71-DFCM
|
The MVI71 DF1 Master/Slave Communication Module is a PLC backplane compatible module that allows Rockwell Automation PLC I/O compatible processors to interface easily with DF1 protocol compatible devices and hosts. Devices commonly supporting the protocol include Rockwell Automation PLCs and power monitoring equipment, as well as several other third party devices in the marketplace.
|
|
DNP 3.0 Communications Module
|
MVI71-DNP
|
The MVI71 DNP 3.0 Master/Slave Communication Module is a single slot, backplane compatible DNP 3.0 interface solution for the Rockwell Automation PLC platform. This module provides highly configurable support of both DNP 3.0 Master and Slave implementations (level 2 minimum), allowing the many SCADA and field devices supporting the DNP protocol to be integrated into the powerful PLC platform.
|
|
DNP 3.0 over Ethernet Communications Module
|
MVI71-DNPSNET
|
The MVI71 DNP 3.0 Server Ethernet Communications Module supports the implementation of the DNP 3.0 (Distributed Network Protocol) over Ethernet, allowing PLC processors to easily communicate with host systems supporting the protocol. The module supports DNP Subset Level 2 features and some Level 3 features.
|
|
EtherNet/IP Interface Module
|
MVI71-DFNT
|
The MVI71 EtherNet/IP (DF1 for Ethernet) Client/Server Communication Module is a PLC backplane compatible module that allows PLC processors to interface easily with EtherNet/IP protocol (Explicit Messaging) compatible devices and hosts. Devices commonly supporting the protocol include Rockwell Automation PLCs, and host HMI systems.
|
|
Gas & Liquid Flow Computer for PLC
|
MVI71-AFC
|
The MVI71 Liquid & Gas Flow Computer Module is a PLC backplane compatible module that allows PLC processors to easily support flow applications with 8 meter runs performing measurement of hydrocarbon gases or liquids using AGA 3, 7, 8 and API MPMS Chapters 11 and 12 measurement standards.
|
|
Generic ASCII Ethernet Communications Module
|
MVI71-GEC
|
The MVI71 Generic ASCII Ethernet Interface module is designed to allow PLC processors to interface easily with ASCII devices using the TCP/IP protocol and the PLC processor. Compatible devices may be either ASCII instruments with Ethernet built-in or Ethernet connection via a thin server to the existing ASCII device.
|
|
Generic ASCII Serial Communications Module
|
MVI71-GSC
|
The MVI71 Generic ASCII Serial Interface Module is a fast and easy way to add two fully configurable ASCII communication ports to the PLC platform without consuming the front port of the processor.
|
|
HART Multi-Drop Communications Module
|
MVI71-HART
|
The MVI71 HART Multidrop Master Communication Module is a PLC backplane-compatible module that allows PLC processors to interface easily with HART compatible devices. Devices commonly supporting the protocol include pressure, temperature, flow transmitters, as well as other similar instruments commonly found in the process (and other) industry.
HART® is a registered trademark of the HART Communication Foundation
|
|
IEC60870-5-101 Master Communications Module
|
MVI71-101M
|
The MVI71 IEC 60870-5-101 Master Communication Module allows Rockwell Automation PLC processors to interface easily with IEC 60870-5-101 slave (controlled unit) devices.
|
|
IEC60870-5-103 Master Communications Module
|
MVI71-103M
|
The MVI71 IEC 60870-5-103 Master Communication Module allows Rockwell Automation PLC backplane I/O compatible processors to interface easily with IEC 60870-5-103 compatible devices. Devices commonly supporting the protocol include relays, breakers, sub-station Communication Modules and other serial communication devices used in power monitoring.
|
|
IEC60870-5-104 Server Communications Module
|
MVI71-104S
|
The MVI71 IEC 60870-5-104 Server Communication Module allows PLC backplane I/O compatible processors to interface easily with IEC 60870-5-104 protocol-compatible clients and hosts.
|
|
Johnson Controls Metasys N2 Slave Interface Module for PLC
|
MVI71-N2
|
The MVI71 Johnson Controls N2 Communication Module allows Rockwell Automation PLC I/O compatible processors to interface easily with other Johnson Controls N2 master devices.
|
|
Modbus Master/Slave Communications Module
|
MVI71-MCM
|
The MVI71 Modbus Master/Slave Communication Module allows Rockwell Automation PLC processors to interface easily with other Modbus protocol compatible devices.
Compatible devices include not only Modicon PLCs (which all support the Modbus protocol) but also a wide assortment of end devices. The module acts as an input/output module between the Modbus network and the Rockwell Automation backplane. The data transfer from the processor is asynchronous from the actions on the Modbus network. A 5000-word register space in the module exchanges data between the processor and the Modbus network.
|
|
Modbus TCP/IP Communications Module
|
MVI71-MNET
|
The MVI71 Modbus TCP/IP Communication Module is designed to allow PLC processors to interface easily with other Modbus TCP/IP protocol-compatible devices.
Compatible devices include not only Modicon processors (which support the Modbus TCP/IP protocol) but also a wide assortment of other clients and server devices.
|
