Generic ASCII Ethernet Interface Module
MVI46-GEC
The MVI46 Generic ASCII Ethernet Interface module is designed to allow SLC processors to interface easily with ASCII devices using the TCP/IP protocol and the SLC processor. Compatible devices may be either ASCII instruments with Ethernet built-in or Ethernet connection via a thin server to the existing ASCII device.
Features and Benefits
Five servers and clients are present on the module permitting both the reception and transmission of data between the Rockwell Automation processor and attached devices.
The MVI46-GEC module is a powerful communication interface for SLC platform processors. Developed under license from Rockwell Automation, the module incorporates proprietary backplane technology that enables powerful data access between the module and the SLC processor.
General Specifications
- Single Slot - 1746 backplane compatible (Local or extended I/O rack only. Remote rack not supported)
- The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module using M0/M1 files
- Ladder Logic is used for data transfer between module and processor. Sample ladder file included
- Configuration data obtained from configuration text file downloaded to module. Sample configuration file included
Applications
The use of the TCP/IP protocol with Ethernet at the device level on the plant floor is becoming widespread in many industry segments. Using the MVI46-GEC, the advantage of Ethernet speed is realized while allowing greater distances between networked devices. This module provides connectivity to many ASCII devices, including applications in:
- Bar code scanner interfaces
- Weigh scale interfaces
- Legacy ASCII protocol connections
- Terminal port emulation
- Printer driver (alarm/status printer)
Functional Specifications
- Five Servers and Clients to receive and/or transmit data
- 10/100MB Ethernet-compatible interface
- Configurable parameters
- Service port number
- Connection timeout
- Close type
- Simple ladder logic operation
- Setup and monitoring through RS-Logix 500 software and user-constructed configuration file (GEC.CFG)
- SLC backplane interface via I/O access
- Each Server monitors:
- State
- IP and port number of connected Client
- Error codes
- Each Client monitors:
- State
- IP and port number of connected Server
- Message related parameters
- ASCII character strings up to 2048 characters in length supported
- Full hardware handshaking control
- Memory usage is completely user-configurable, supporting the storage and transfer of up to 4000 bytes to/from the control processor
- Module error and status conditions returned to processor for diagnostic purposes
- Module status
- Port error status word (bit mapped)
- Port receive state
- Port receive character count
- Port receive block count
- Port transmit state
- Port transmit character count
- Port transmit block count
- Module configuration and communication configuration data is transferred to the MVI46-GEC via a pre-defined user data type in the processor
Hardware Specifications
|
Ethernet and CFG Ports
|
|
|
Ethernet Port
|
RJ45 connection
10/100 Mbit Ethernet support (auto-sensing)
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
|
|
CFG Port
|
RJ45 (DB-9M with supplied cable)
RS-232 only
|
|
Shipped with unit
|
RJ45 to DB-9M adapter cable and 6-foot RS-232 configuration cable for debug port
|
|
Specification
|
Description
|
|
Backplane Current Load
|
800 ma @ 5V (from backplane)
|
|
Operating Temperature
|
0 to 60° C (32 to 140° F)
|
|
Storage Temperature
|
-40 to 85° C (-40 to 185° F)
|
|
Shock
|
30g operational, 50g non-operational
|
|
Relative Humidity
|
5 to 95% (non-condensing)
|
|
Vibration
|
5g from 10 to 50 Hz
|
|
Processor
|
Compatible with Rockwell Automation SLC 5/02 M0/M1 capable processors or newer.
|
|
LED indicators
|
Module status, Backplane transfer status, Application status, Serial activity and error LED status
|
Ordering Information
| MVI46-GEC |
Generic ASCII Ethernet Interface Module |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
