Modbus TCP/IP Communication Client Module
MVI56-MNETC
The MVI56 Modbus TCP/IP Client Communication Module is designed to allow ControlLogix processors to interface easily with other Modbus TCP/IP protocol-compatible devices.
Compatible devices include not only Modicon processors (which support the Modbus TCP/IP protocol) but also a wide assortment of other server devices.
Features and Benefits
This module was created to improve the performance when servers are not needed on a Modbus TCP/IP network. The module supports up to 30 clients with up to 16 commands for each client, making it easy to enable/disable the commands from the ladder logic. The client command control word contains one bit for each command. This module does not support the conditional write command.
Some of the other features include:
- Support for the storage and transfer of up to 5000 registers to/from the ControlLogix processor's controller tags
- Module memory usage that is completely user definable
- 10/100 MB Ethernet compatible interface
- Configurable parameters for the client include:
- Minimum Command Delay
- User Defined Commands (Read/Write)
Applications
With the growing trend of Ethernet technology in the industrial marketplace, this product has a wide variety of application uses.
- Food processing
- Petrochemical
- Pulp and paper
- Automobile manufacturing
- Water and Wastewater
- Oil and Gas
- Power and Electric
Functional Specifications
- Operation via simple ladder logic
- Complete set up and monitoring of module through software and user-constructed configuration file (MNET.CFG)
- Backplane interface via I/O access
General Protocol Specifications
|
Type
|
Specifications
|
|
Floating Point Data
|
Floating point data movement supported, including configurable support for Enron implementation
|
Modbus TCP/IP Client
- The client driver supports the active reading and writing of data with Modbus TCP/IP compatible devices.
- Up to 30 client connections available.
Hardware Specifications
|
Ethernet and CFG Ports
|
|
|
Ethernet Port
|
RJ45 connection
10/100 Mbit Ethernet support (auto-sensing)
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
|
|
CFG Port
|
RJ45 (DB-9M with supplied cable)
RS-232 only
|
|
Shipped with unit
|
RJ45 to DB-9M adapter cable and 6-foot RS-232 configuration cable for debug port
|
|
Specification
|
Description
|
|
Backplane Current Load
|
800 mA @ 5 V
|
|
Operating Temperature
|
0 to 60° C (32 to 140° F)
|
|
Storage Temperature
|
-40 to 85° C (-40 to 185° F)
|
|
Shock:
|
30g Operational
50g non-operational
Vibration: 5 g from 10 to 150 Hz
|
|
Relative Humidity
|
5 to 95% (non-condensing)
|
|
LED Indicators:
|
Module Status
Backplane Transfer Status
Application Status
Serial Activity
|
Ordering Information
| MVI56-MNETC |
Modbus TCP/IP Communication Client Module |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
