IEC60870-5-104 Server Communications Module
MVI71-104S
The MVI71 IEC 60870-5-104 Server Communication Module allows PLC backplane I/O compatible processors to interface easily with IEC 60870-5-104 protocol-compatible hosts.
Features and Benefits
The MVI71-104S module acts as an input/output module between the IEC 60870-5-104 Ethernet network and the Rockwell Automation backplane. The data transfer from the PLC processor is asynchronous from the actions on the network. A 4000-word register space in the module exchanges data between the processor and the Ethernet network.
General Specifications
- Single Slot - 1771 backplane compatible
- The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module
- Ladder Logic is used for data transfer between module and processor. Sample ladder file included.
- Configuration data obtained from configuration text file downloaded to module. Sample configuration file included.
The MVI71-104S module is designed to address the application where a device using the IEC 60870-5-104 protocol needs to communication with the Rockwell Automation processor. As such, the IEC server module can be used as a gateway in many SCADA installations in industries such as:
- Power
- Petrochemical
- Water treatment
- Oil and gas production
Functional Specifications
The MVI71-104S module accepts commands from an attached master unit (client) on the network and generates unsolicited messages. These sets of messages are either spontaneous or cyclic.This data can be derived from the PLC processor. The remote master device can control data in the PLC processor using standard control messages supported by the protocol. The remote master device uses the fully-configured databases in the module to control outputs and monitor inputs.
- Supports clock synchronization commands
- Supports clock synchronization (set in ladder) from the module to the processor, or from the processor to the module
- Supports group interrogation
- Processes information in control direction and monitored direction
- Configurable monitored and command data located in the MVI database
- Supports timestamp events
Physical Specifications
- The module is designed by ProSoft Technology and incorporates licensed technology from Allen-Bradley (PLC backplane technology)
- PLC form factor - single slot
-
Connections
RJ45 connector for IEC-870-5-104 TCP/IP Ethernet
1-RJ45 RS-232 configuration tool connector
PLC Interface
- Operation via simple ladder logic
- Complete setup and monitoring of the module through RSLogix 5 software
- PLC backplane interface via block transfer or side-connect interface
- All data related to the module is contained in user-defined files.
Hardware Specifications
|
Dimensions |
Standard 1769 Single-slot module |
|
Current Load |
800 mA max@ 5 VDC (Serial) |
|
Operating Temp. |
0 to 60 Deg C |
|
32 to 140 Deg F |
|
|
Storage Temp. |
-40 to 85 Deg C |
|
-40 to 185 Deg F |
|
|
Relative Humidity |
5 to 95% (w/o condensation) |
|
LED Indicators |
Power and Module Status |
|
Application Status |
|
|
CFG Port Activity |
|
|
Error Status |
|
|
CFG Port |
RJ45 (DB-9M w/ supplied cable) |
|
RS-232 only |
|
|
No hardware handshaking |
|
|
App Port (Ethernet) |
10/100 MB Ethernet compatible interface Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 |
|
Shipped with Unit |
RJ45 to DB-9M cables for each port |
|
6-foot RS-232 configuration Cable |
|
Ethernet and CFG Ports |
|
|
Ethernet Port |
RJ45 connection |
|
CFG Port |
RJ45 (DB-9M with supplied cable) |
|
Shipped with unit |
RJ45 to DB-9M adapter cable and 6-foot RS-232 configuration cable for debug port |
Ordering Information
| MVI71-104S | IEC60870-5-104 Server Communications Module |
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. | |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
Asia Pacific +603.7724.2080 asiapc@prosoft-technology.com |
Europe +33 (0)5.34.36.87.20 europe@prosoft-technology.com |
|
Latin America Office: +1 281.298.9109 Mobile: +1-281-830-8946 latinam@prosoft-technology.com |
North America +1 661.716.5100 Fax: +1 661.716.5101 info@prosoft-technology.com |
