EtherNet/IP to PROFIBUS DP Master Communication Module

5204-DFNT-PDPM

Product Description

The ProLinx family EtherNet/IP to PROFIBUS DP Master communications module (5204-DFNT-PDPM) creates a powerful connection between devices on an EtherNet/IP network and a PROFIBUS slave device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and PROFIBUS DP Master configurable DB9F port.

The Ethernet/IP (DFNT) protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a very powerful data transfer tool.

The PROFIBUS DP Master (PDPM) protocol driver supports Master implementations of the protocol on either a Mono-Master or Multi-Master network.

Product Applications

The DFNT-PDPM modules are the ideal solution for the many applications where EtherNet/IP connectivity can be used to integrate a PROFIBUS DP slave device into a system. The EtherNet/IP gateway is a powerful module designed with both Client and Server support, enabling easy connection to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and similar devices). In combination with the PROFIBUS DP Master device support, the module provides a very powerful interface to the many PROFIBUS slave devices which are in use in the industrial marketplace today. Applications for the module are found in most industries, especially the Manufacturing, Oil and Gas, Electrical Power and Food Processing.

Functional Specifications

Internal Database

The ProLinx module contains an internal database that consists of areas for application data, status information, and configuration information.

The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network.

Application Data Area

The data area is used to store and retrieve data by the protocol drivers and for data exchange between protocols. The database is used as a source for write commands to remote devices and holds data collected from the remote devices. Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database.

Status Data Area

This area is used to store error codes, counters, and port status information for each port.

Configuration File

This file contains module configuration information such as port configuration, network information, and command configuration. This configuration file is downloaded to, or uploaded from, the module.

EtherNet/IP Protocol Specifications

The EtherNet/IP protocol is one of the primary connectivity tools to the different Rockwell Automation platforms. The Explicit Messaging aspect of the protocol (only) has been implemented in the ProLinx units to provide the data transfer link between the ProLinx units and the Rockwell Automation hardware. (Implicit Messaging (I/O communications) is not supported)

General Protocol Information
Messaging	PCCC on CIP Explicit Messaging supported
Compatibility	Compatible devices include a wide assortment of other client/server devices such as: - PLC5/E Rev. C/N, D/E, E/D or later - SLC5/05 Series A, OS503 frn4 or later - ControlLogix processor via 1756-ENET - 1785-ENET Series A, Rev. D - Interchange (release dependent) - RSLinx Gateway V1.7 or later
Miscellaneous	125 word read and write data lengths Floating point data supported

EtherNet/IP Server Specifications

When in the Server mode, the module accepts commands from one or more clients to read/write data stored in the module's internal registers.

The following table lists EtherNet/IP Server specifications:

EtherNet/IP Server Specifications
Connections	Five (5) independent TCP server sockets permit remote clients to interact with all data contained in the module.
Data File	Data Table File Start - Fixed at N10 Data Table File Size - 100 or 1000 words
PCCC on CIP Commands supported (DF1 commands)	Basic Command Set 0x00 Protected Write 0x01 Unprotected Read 0x02 Protected Bit Write 0x05 Unprotected Bit Write 0x08 Unprotected Write PLC-5 Command Set (0x0F) 0x00 WordRange Write (Binary Address) 0x01 WordRange Read (Binary Address) 0x00 WordRange Write (ASCII Address) 0x01 WordRange Read (ASCII Address) SLC Command Set (0x0F) 0xA1 Prot Typed Read w/ 2 addr fields 0xA2 Prot Typed Read w/ 3 addr fields 0xA9 Prot Typed Write w/ 2 addr fields 0xAA Prot Typed Write w/ 3 addr fields
CIP Services Supported	0x4C CIP Data Table Read 0x4D CIP Data Table Write

EtherNet/IP Client Specifications

When configured in Client mode, the module controls the read/write data transfer between the gateway and other Ethernet/IP devices. When configured in this mode, data transfer can be initiated and executed without any ladder programming being required in the Rockwell Automation hardware.

The following table provides Ethernet/IP Client specifications:

EtherNet/IP Client Specifications
General	One client
Command List	Support for 100 commands, each configurable for command, IP address, register to/from addressing and word/bit count
Polling of command list	User configurable polling of commands, including disabled, continuous and on change of data (write only)
PCCC on CIP Commands Supported (DF1 Commands)	Basic Command Set 0x00 Protected Write 0x01 Unprotected Read 0x02 Protected Bit Write 0x05 Unprotected Bit Write 0x08 Unprotected Write PLC-5 Command Set (0x0F) 0x00 WordRange Write (Binary Address) 0x01 WordRange Read (Binary Address) 0x26 Read-Modify-Write (Binary Address) 0x00 WordRange Write (ASCII Address) 0x01 WordRange Read (ASCII Address) 0x26 Read-Modify-Write (ASCII Address) SLC Command Set (0x0F) 0xA1 Prot Typed Read w/ 2 addr fields 0xA2 Prot Typed Read w/ 3 addr fields 0xA9 Prot Typed Write w/ 2 addr fields 0xAA Prot Typed Write w/ 3 addr fields 0xAB Prot Typed Write w/ Mask 3 addr fields
Status Data	Error codes available on an individual command basis.

PROFIBUS DP Master Protocol Specifications

The PROFIBUS Master protocol driver exists as a single port implementation. The driver can be configured as a Class 1 PROFIBUS Master to interface with other PROFIBUS slave devices. The unit is also used for configuration of the nodes on the PROFIBUS network. It provides access to both standard as well as extended diagnostic information. The PROFIBUS master port can be used to continuously interface with PROFIBUS slave devices over a serial communication interface (RS-485).

General Parameters
Communication parameters	Baud Rate: 9.6 kbit/s - 12 Mbit/s

Slaves	Up to 125 Slaves
Data I/O	Up to 512 cyclic bytes (256 words) input and 512 bytes (256 words) output data
Command List	Read Diag Global Cmd Read Cntrs Reset Cntrs
Node address	0 to 125 (software selectable)
Status Data	Error codes, counters and port status available per configured slave on the network.

PDPMV1 Compatibility Notice to PDPM Users

The PDPMV1 product is not backward compatible with the PDPM product due to new enhancements and command structure. The PDPMV1 DPV1 master gateway product provides enhanced features to the PDPM DPV0 gateway product as follows:

Increased Cyclic IO. The DPPMV1 provides 768 Words of Input and 768 Words of Output.
ProSoft Configuration Builder (PCB) complete support. The PCB provides module level configuration and integrated PROFIBUS master network configuration support.
The PDPMV1 master supports DPV1 Class 1 or Class 2 DPV1 features such as: Acyclic communication with slaves for parameterization and other slave settings, Alarm handling, extended diagnostics.

Hardware Specifications

Power Supply	24 VDC nominal
	18-32 VDC allowed
	Positive, Negative, GND Terminals
	2.5 mm screwdriver blade
Current Load	500 mA max@ 32 VDC max
Operating Temperature	-20 to 50 Deg C
	-4 to 122 Deg F
Storage Temperature	-40 to 85 Deg C
	-40 to 185 Deg F
Relative Humidity	5-95% (w/o condensation)
Dimensions	Standard 5.20H x 2.07W x 4.52D inches 13.2cmH x 5.25cmW x 11.48cmD Extended 5.20H x 2.73W x 4.52D inches 13.2cmH x 6.934cmW x 11.48cmD
LED Indicators	Power and Module Status
	Application Status
	Serial Port Activity LED
	Serial Activity and Error LED Status
Configuration Serial Port	Mini-DIN
	RS-232 only
	No hardware handshaking
Ethernet Port	10Base-T Connector
	Link and Activity LED indicators
	Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991
	Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
Application Serial Ports	Mini-DIN
	RS-232/422/485
	RS232 handshaking configurable
	RS422/485 screw termination included
Port Isolation	2500V Opto-Isolators
	500V Power Supply Isolation
Shipped with each unit	Mini-DIN to DB-9M cables per serial port
	4 ft RS-232 configuration cable
	2.5mm screwdriver
	CD (docs and Configuration utility)
	RS-422/485 DB9 to Screw Terminal
	Adaptor (1 or 4, depending on ports)

PROFIBUS Connector	DB-9F Standard PROFIBUS connector
PROFIBUS LED Indicators	Tkn - Green
	Err - Red
	Rdy - Green
	Run - Green

Click here for dimensions diagram

Certifications

The ProLinx gateway module has the following certifications:
CE
ATEX Cat 3 Zone 2
cULus Haz Loc Class 1, Div 2

Ordering Information

5204-DFNT-PDPM

EtherNet/IP to PROFIBUS DP Master

To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here.

Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.

Sales and Support:

Asia Pacific +603.7724.2080 asiapc@prosoft-technology.com	Europe +33 (0)5.34.36.87.20 europe@prosoft-technology.com
Latin America Office: +1 281.298.9109 Mobile: +1-281-830-8946 latinam@prosoft-technology.com	North America +1 661.716.5100 Fax: +1 661.716.5101 info@prosoft-technology.com

Downloads

Datasheet

PDPM Driver Manual

DFNT Driver Manual

ProSoft Configuration Builder

Set-Up Guide

Image Gallery

ProLinx 5000 Series Module

Return to Non-Printable Page