Wireless Modbus TCP/IP Gateway
6201-WA-MNET
Product Description
The ProLinx Wireless Modbus TCP/IP Gateway creates a powerful wireless connection between devices on a Modbus TCP/IP network. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port.
ProSoft Wireless Protocol (PWP) offers versatility where a mix of control devices requires cooperation with each other. This involves sharing of information across the applications regardless of device or network type, often at high speed, and with high reliability. Wireless bandwidth utilization is optimized by using efficient communication methods. The protocol supports Unicast, Broadcast and Multicast group messaging. Efficiency is based on the fact each device on the "wireless" network can produce these types of messages and each device determines which of these messages to consume.
The Modbus TCP/IP (MNET) driver can be used to interface many different protocols into the Schneider Electric Quantum family of processors as well other software solutions supporting the protocol. The MNET driver supports Client connections as well as Server connections.
Product Applications
-
Food processing -
Petrochemical -
Pulp and paper -
Automobile manufacturing -
Water and Wastewater -
Oil and Gas -
Power and Electric
Functional Specifications
Internal Database
The ProLinx module contains an internal database that consists of areas for application data, status information, and configuration information.
The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network.
Application Data Area
The data area is used to store and retrieve data by the protocol drivers and for data exchange between protocols. The database is used as a source for write commands to remote devices and holds data collected from the remote devices. Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database.
Status Data Area
This area is used to store error codes, counters, and port status information for each port.
Configuration Data Area
This area contains module configuration information such as port configuration, network information, and command configuration. This configuration file is downloaded to, or uploaded from, this area.
Modbus TCP/IP Protocol Specifications
The Ethernet driver interfaces with a common internal database in the module. This permits the sharing of data across many different protocols and networks.
Modbus TCP/IP Port Specifications
Server
The MNET module supports server functionality using the reserved Modbus TCP/IP service port 502, as well as service port 2000 to support the TCP/IP encapsulated Modbus protocol that is supported by several HMI manufacturers. Services supported in the module permit client applications (i.e., HMI software packages, Quantum processors, etc.) to read from and write to the module's database.
Data in the module's internal database is accessible for read and write operations by any node on the network supporting the MBAP (service port 502) or MNET (service ports 2000/2001) TCP/IP protocols.
There is no configuration of the MNET module required to implement Server functionality other than setting up the network and database parameters in the user configuration file.
|
Modbus TCP/IP Server |
|
|
Type |
Specification |
|
General |
The server driver supports connections to Modbus TCP/IP clients supporting Service Port 502 using the standard MBAP protocol, and clients supporting Modbus on Service Port 2000. - Supports up to five (5) independent server connections for Service Port 2000 |
|
Configurable Parameters |
Module IP Address |
|
Modbus Commands supported |
1 : Read Output Status |
Client
The module supports a client connection on the TCP/IP network to interface with processors (and other server based devices) using a user constructed command list of up to 100 entries.
|
Modbus TCP/IP Client |
|
|
Type |
Specification |
|
General |
The client driver supports the active reading and writing of data with Modbus TCP/IP compatible devices. - One client connection available (connect up to 100 servers/devices with 100 commands) |
|
Configurable parameters |
Number of active commands (Up to 100 for client) |
|
Modbus Commands supported |
1 : Read Output Status |
|
Command List |
Up to 100 commands on the Client port, each fully configurable for function, Server IP address, Service Port, register to/from addressing and word/bit count |
|
Status Data |
Error codes available on an individual command basis. |
|
Polling of command list |
User configurable polling of commands, including disabled, continuous and on change of data (write only) |
Hardware Specifications
| Power Supply | 24 VDC nominal |
| 18-32 VDC allowed | |
| Positive, Negative, GND Terminals | |
| 2.5 mm screwdriver blade | |
Current Load |
500 mA max@ 32 VDC max |
| Operating Temperature | -20 to 50 Deg C |
| -4 to 122 Deg F | |
| Storage Temperature | -40 to 85 Deg C |
| -40 to 185 Deg F | |
| Relative Humidity | 5-95% (w/o condensation) |
| Dimensions | Standard |
|
LED Indicators |
Power and Module Status |
| Application Status | |
| Serial Port Activity LED | |
| Serial Activity and Error LED Status | |
| RF Link Status | |
| RF Data Status | |
| Configuration Serial Port | Mini-DIN |
| RS-232 only | |
| No hardware handshaking | |
| Ethernet Port | 10Base-T Connector |
| Link and Activity LED indicators | |
| Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 | |
| Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration | |
| Application Serial Ports | Mini-DIN |
| RS-232/422/485 | |
| RS232 handshaking configurable | |
| RS422/485 screw termination included | |
| Port Isolation | 2500V Opto-Isolators |
| 500V Power Supply Isolation | |
| Shipped with each unit | Mini-DIN to DB-9M cables per serial port |
| 4 ft RS-232 configuration cable | |
| 2.5mm screwdriver | |
| CD (docs and Configuration utility) | |
| RS-422/485 DB9 to Screw Terminal | |
| Adaptor (1 or 4, depending on ports) |
Certifications
The ProLinx gateway module has the following certifications:CE
ATEX Cat 3 Zone 2
cULus Haz Loc Class 1, Div 2
Ordering Information
|
6201-WA-MNET |
Wireless Modbus TCP/IP Gateway |
To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here.
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
Asia Pacific +603.7724.2080 asiapc@prosoft-technology.com |
Europe +33 (0)5.34.36.87.20 europe@prosoft-technology.com |
|
Latin America Office: +1 281.298.9109 Mobile: +1-281-830-8946 latinam@prosoft-technology.com |
North America +1 661.716.5100 Fax: +1 661.716.5101 info@prosoft-technology.com |
