DF1 Master/Slave

The HART Analog Input Gateway provides a clean way to integrate HART Analog instruments with existing controller platforms on a DF1 network. The gateway works well for field applications where it can be installed closer to HART instrument, saving on copper cable and installation costs. The gateway also saves valuable rack space for other in-chassis options. The gateways provide extremely fast channel update times (all channels updating simultaneously in 67 ms) making the HART Analog Input Gateway ideal for applications where high speeds and point-to-point connectivity are required. These gateways are available in 4 and 8 Analog input channel options.

The ProLinx family A-B Remote I/O Adapter to DF1 Master/Slave communications module creates a powerful connection between devices on a Remote I/O network and DF1 devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and up to four serial ports.

The ProLinx family DF1 Serial Port Expander module (5102-DFS3-DFM) allows you to attach up to three separate DF1 master devices to a single DF1 slave.

The module is designed to act as a multiplexer, allowing simultaneous connections from multiple DF1 masters to a single DF1 slave. A common use for the module is to have an HMI panel, SCADA package, and Programming software all communicating to the same DF1 channel 0 port of an Allen Bradley processor.

The module is a stand-alone DIN-rail mounted protocol gateway that provides a single DF1 Master port and three DF1 Slave ports.

The ProLinx family DF1 to ASCII communications module (5102-DFCM-ASCII3) creates a powerful connection between devices on a DF1 network and ASCII devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one DF1 configurable serial port and three ASCII configurable serial ports.

The ProLinx family DF1 Master/Slave to Honeywell DE Master communications module (5106-DFCM-DEM) creates a powerful connection between devices on a DF1 network and Honeywell DE devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and eight Honeywell DE channels.

The ProLinx family DF1 Master/Slave to IEC60870-5-101 Slave communications module creates a powerful connection between devices on an IEC 101 network and DF1 devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one IEC 101 Slave configurable serial port and three DF1 Master or Slave configurable serial ports.

The ProLinx family DF1 Master/Slave to IEC60870-5-103 Master communications module (5102-DFCM-103M) creates a powerful connection between devices on a DF1 network and IEC 103 slave devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides two configurable serial ports.

The ProLinx family DF1 Master Slave to PROFIBUS DP Master communications module (5104-DFCM-PDPM) creates a powerful connection between devices on a DF1 network and PROFIBUS DP Master devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and PROFIBUS DP Master port.

The ProLinx family DF1 Master/Slave to PROFIBUS DP Slave communications module (5105-DFCM-PDPS) creates a powerful connection between devices on a PROFIBUS DP network and DF1 devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and one PROFIBUS DP Slave.

The ProLinx family DF1 Master/Slave to Hart Multidrop communications module (5107-DFCM-HART) creates a powerful connection between devices on a DF1 network and Hart devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and up to 8 Hart channels.

The ProLinx family DH-485 to DF1 Master/Slave communications module (5102-DH485-DFCM3) creates a powerful connection between devices on a DH-485 network and DF1 devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one DH-485 configurable serial port and three DF1 Master or Slave configurable serial ports.

The ProLinx family DNP 3.0 Master to DF1 Master/Slave communications module (5102-DNPM-DFCM) creates a powerful connection between devices on a DF1 network and a DNP Slave device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one DNP configurable serial port and three DF1 Master/Slave configurable serial ports.

The ProLinx family DNP 3.0 Slave to DF1 Master/Slave communications module (5102-DNPS-DFCM) creates a powerful connection between devices on a DNP network and DF1 devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one DNP Slave serial port and three DF1 serial ports individually configurable as either Master or Slave.

The ProLinx family DNP over Ethernet to DF1 Master/Slave communications module (5201-DNPSNET-DFCM) creates a powerful connection between devices on a DNP over Ethernet network and DF1 Master/Slave devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and up to four serial ports.

The ProLinx family EtherNet/IP to DF1 Master/Slave communications module (5201-DFNT-DFCM) creates a powerful connection between devices on an EtherNet/IP network and DF1 devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one ethernet port and up to four serial ports.

The ProLinx family IEC60870-5-104 Server to DF1 Master/Slave communications module (5201-104S-DFCM) creates a powerful connection between devices on an IEC 104 network and DF1 devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and up to four serial ports.

The ProLinx family Modbus Master/Slave to DF1 Master/Slave communications module (5102-MCM4-DFCM4) creates a powerful connection between Modbus Master/Slave and DF1 Master/Slave networks and devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides four serial ports, each individually configurable as a Modbus or DF1 Master or Slave..

The ProLinx family Modbus Plus to DF1 Master/Slave communications module (5301-MBP-DFCM) creates a powerful connection between devices on a Modbus Plus network and DF1 Slave devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Modbus Plus configureable DB-9F port and one configurable serial port.

The ProLinx family Modbus TCP/IP to DF1 Master/Slave communications module (5201-MNET-DFCM) creates a powerful connection between devices on a Modbus TCP/IP network and DF1 devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and up to four serial ports.