Wireless IEC 60870-5-104 Server Gateway
6201-WA-104S
Product Description
The ProLinx Wireless IEC60870-5-104 Server Gateway creates a powerful wireless connection between devices on an IEC 104 Server network.
The PWP modules offer one-to-one or one-to-many interconnect scenarios. Data is exchanged between devices and/or networks using a shared common database and an efficient but powerful wireless protocol. This common database provides the "backbone" communications for various field devices using different networks.
The 104S module accepts commands from an attached master unit on the network and generates unsolicited messages.
Product Applications
-
Power -
Petrochemical -
Water treatment -
Oil and gas production
Functional Specifications
Internal Database
The ProLinx module contains an internal database that consists of areas for application data, status information, and configuration information.
The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network.
Application Data Area
The data area is used to store and retrieve data by the protocol drivers and for data exchange between protocols. The database is used as a source for write commands to remote devices and holds data collected from the remote devices. Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database.
Status Data Area
This area is used to store error codes, counters, and port status information for each port.
Configuration Data Area
This area contains module configuration information such as port configuration, network information, and command configuration. This configuration file is downloaded to, or uploaded from, this area.
IEC 60870-5-104 Server Protocol Specifications
Operating in the Server mode, the protocol driver accepts commands from one or more clients to read/write data stored in the module's internal registers.
The 104S module acts as a gateway between the IEC 60870-5-104 Ethernet network and many of the other serial and network protocols, as well as several proprietary interfaces.
General specifications include:
- User-definable module memory usage
- Protocol implementation conforms to the IEC 60870-5-104 specification with fully configurable parameters
The 104S module accepts commands from an attached master unit on the network and generates unsolicited messages. These last sets of messages are either spontaneous or cyclic. Data transferred to the host is derived from the module's internal database. The remote master device can control data in the database and hence the devices connected using the other protocol in the module using standard control messages supported in the protocol. The remote master device uses the fully-configured databases in the module to control outputs and monitor inputs.
|
IEC 60870-5-101 Server |
|
|
Configurable Parameters |
Override StartDT |
|
Status Data |
The status data include the following: t0, t1, t2 and t3 timeout , Bad Address Errors, SocketState, Host IP Address. |
|
Supported Data Points |
M_SP_NA |
Hardware Specifications
| Power Supply | 24 VDC nominal |
| 18-32 VDC allowed | |
| Positive, Negative, GND Terminals | |
| 2.5 mm screwdriver blade | |
Current Load |
500 mA max@ 32 VDC max |
| Operating Temperature | -20 to 50 Deg C |
| -4 to 122 Deg F | |
| Storage Temperature | -40 to 85 Deg C |
| -40 to 185 Deg F | |
| Relative Humidity | 5-95% (w/o condensation) |
| Dimensions | Standard |
|
LED Indicators |
Power and Module Status |
| Application Status | |
| Serial Port Activity LED | |
| Serial Activity and Error LED Status | |
| RF Link Status | |
| RF Data Status | |
| Configuration Serial Port | Mini-DIN |
| RS-232 only | |
| No hardware handshaking | |
| Ethernet Port | 10Base-T Connector |
| Link and Activity LED indicators | |
| Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 | |
| Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration | |
| Application Serial Ports | Mini-DIN |
| RS-232/422/485 | |
| RS232 handshaking configurable | |
| RS422/485 screw termination included | |
| Port Isolation | 2500V Opto-Isolators |
| 500V Power Supply Isolation | |
| Shipped with each unit | Mini-DIN to DB-9M cables per serial port |
| 4 ft RS-232 configuration cable | |
| 2.5mm screwdriver | |
| CD (docs and Configuration utility) | |
| RS-422/485 DB9 to Screw Terminal | |
| Adaptor (1 or 4, depending on ports) |
Certifications
The ProLinx gateway module has the following certifications:CE
ATEX Cat 3 Zone 2
cULus Haz Loc Class 1, Div 2
Ordering Information
|
6201-WA-104S |
Wireless IEC 60870-5-104 Server Gateway |
To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here.
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
Asia Pacific +603.7724.2080 asiapc@prosoft-technology.com |
Europe +33 (0)5.34.36.87.20 europe@prosoft-technology.com |
|
Latin America Office: +1 281.298.9109 Mobile: +1-281-830-8946 latinam@prosoft-technology.com |
North America +1 661.716.5100 Fax: +1 661.716.5101 info@prosoft-technology.com |
