ILX69-PBS

PROFIBUS DPV1 Slave for CompactLogix

ILX69-PBS

The ILX69 PROFIBUS Slave module is an in-chassis PROFIBUS DPV1 Slave for CompactLogix, supporting cyclic PROFIBUS I/O data and acyclic messaging.

Explicit ladder logic CIP message blocks provide slave status diagnostic data and the ability for acyclic messaging.The ILX69 interface appears to the CompactLogix controller as a standard I/O module allowing it to be configured via Studio/RSLogix™5000. The cyclic PROFIBUS I/O data can be configured in Studio/RSLogix™ 5000, or configuration can be transferred from the Master to the slave module. The Ethernet interface allows for remote diagnostic and troubleshooting. Complete program examples for simple and quick start-up are available.

Check out a successful application with this module: Help CIP System Communicate.

Architectures

Click on image(s) to enlarge
Drag with the mouse. Click for close.

Features and Benefits

  • Rockwell Automation Encompass Approved
  • PI Certified
  • Remote diagnostics via Ethernet
  • Supports DPV1 Acyclic Messaging
  • Field-tested with multiple PROFIBUS Masters from multiple vendors
  • AOP provided to allow for seamless integration to Studio 5000 and RSLogix 5000
  • Video setup tutorial provided on www.prosoft-technology.com

Specifications

PROFIBUS DP Specifications

Specification

Description

PROFIBUS DP Cyclic Data

244 Bytes IN / 244 Bytes OUT

Acyclic Read/Writes

240 Bytes

Acyclic communication 

DPV1 Class 1 Read/Write
DPV1 Class 1 Alarm
DP V1 Class 2 Read/Write/Data Transport

Baud rate

9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75
kBaud, 187.5 kBaud, 500 kBaud 1.5 MBaud, 3
MBaud, 6 MBaud, 12 MBaud

Auto-detection mode is supported

Hardware Specification

Specification

Description

PROFIBUS Interface

RS-485, max. 12 Mbps, potential free, according
EN 50170 

Diagnostic Interface

10/100 Ethernet, RJ45

Power Supply

+5 V ±5 % / 570 mA 

Max. Distance Rating 

2 slot

Dimensions 

Standard 1769 Single-slot module

Burst 

EN 61000-4-4, 2 kV, 5 kHz 

Surge 

EN 61000-4-5, 2 kV common mode, 1 kV
differential mode 

ESD 

EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect 

Radiated/Conducted Immunity

EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1
kHz sine wave
EN 61000-4-6, 10 V, 0,15...30 MHz

Radiated/Conducted Emission 

EN 55011 Class A 

Vibration/Shock

IEC 600068-2-6, 10-150 Hz, ± 0,75 mm, ± 1 g, 1
Octave/min
IEC 600068-2-27, 15 g, 11 ms 

Operating Temperature

0°C to 60°C (32°C to 140°F) 

Relative Humidity 

5 to 95% (non-condensing) 

PROFIBUS conformance 

Certified

Certifications

ATEX Letter of Conformity 55.24 kB Last Modified 05/12/2022
CB Safety 388.14 kB Last Modified 02/26/2020
Declaration of Conformity (RoHS/CE) 442.33 kB Last Modified 12/18/2020
UL/CUL; Class1, Div. 2 388.14 kB Last Modified 02/14/2019
PI PROFIBUS Certification 160.00 kB Last Modified 09/15/2017
Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) 1.92 MB Last Modified 02/11/2022
Korean KC Registration 261.73 kB Last Modified 03/25/2020
Declaration of REACH Compliance 341.08 kB Last Modified 02/08/2021