ProSoft Technology, Inc.
Your Location: Home > PROFIBUS Solutions  
 

Search


ProSoft Technology offers a complete breadth of PROFIBUS DPV0/DPV1 solutions for most Rockwell Automation platforms, Schneider Electric platforms, Stand-alone gateways, and wireless applications. With ProSoft Technology’s CIPconnect™ module configuration, diagnostics and FDT/DTM support over EtherNet/IP using the Rockwell Automation Ethernet module is available for the ControlLogix platform.

The most efficient and user-friendly PROFIBUS Module available today

The MVI56 PROFIBUS DPV1 Master Communication Module is a powerful communication interface for ControlLogix platform processors. The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol. ProSoft Technology’s PROFIBUS DP Communication Module is CIPconnect enabled.

What is CIPconnect Enabled?

CIPconnect provides connectivity for a PC to the ProSoft Technology PROFIBUS module over Ethernet using Rockwell Automation’s 1756-ENBT EtherNet/IP module. This allows the user to configure the PROFIBUS Master module and network, upload, download files and view network and module diagnostics from a PC. RSLinx is not required for configuration. All that is needed is an IP address and slot number.

What else does CIPconnect do for the ControlLogix PROFIBUS?

  • Provides the freedom of accessing a ProSoft module from anywhere the Ethernet network allows.
  • Allows FDT Asset Management software to connect to devices using freely distributed communication DTM.
  • Allows for wireless type connections to the module.
  • Simplifies IT administration in supporting a single IP address per rack especially when multiple ProSoft Technology modules are required.
ProSoft Technology offers a wide range of PROFIBUS connectivity solutions for all Rockwell Automation platforms including wire and wireless stand-alone gateway products.

PROFIBUS DPV1 Master for CompactLogix

PS69-DPM

This module expands the functionality of Rockwell Automation’s CompactLogix™ to include PROFIBUS DPV1. The module and network scanlist configuration for the PS69-DPM is done with our next generation configuration tool, PROSOFT.fdt, a FDT/DTM compliant tool. The configuration is transferred via the serial diagnostic interface and stored in the module’s FLASH memory. Complete program examples for simple and quick start-up are available.

PROFIBUS DPV1 Slave for CompactLogix

PS69-DPS

This module expands the functionality of Rockwell Automation’s CompactLogix™ to include PROFIBUS DPV1. The PS69-DPS supports both I/O control and messaging. Explicit ladder logic CIP message blocks provide slave status diagnostic data and acyclic messaging. This interface appears to the CompactLogix™ controller as a standard I/O module allowing it to be configured via RSLogix™ 5000, or configuration can be transferred from the Master to the PS69-DPS. For third party configuration a GSD file is supplied.

PROFIBUS Master for CompactLogix

MVI69-PDPMV1

The module acts as an input/output module between the PROFIBUS network and the CompactLogix or MicroLogix processors. Data transfer from the processor is asynchronous with the I/O data transfer on the PROFIBUS network. Databases are user-defined and stored in the module to hold the data required by the protocol.

PROFIBUS Slave for CompactLogix

MVI69-PDPS

The PROFIBUS DP-V0 Slave gives access to the unit's input and output images with up to 244 bytes of Input and Output data, for a maximum of 400 bytes total. These Input and Output data blocks are mapped by the user within the module's data memory allowing maximum flexibility and data transfer with other protocols.

PROFIBUS Master for SLC

MVI46-PDPMV1

The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol.

PROFIBUS Slave for SLC

MVI46-PDPS

The PROFIBUS DP Slave gives access to the unit's input and output images with up to 244 bytes of Input and Output data, for a maximum of 400 bytes total. These Input and Output data blocks are mapped by the user within the inRax module's data memory allowing maximum flexibility and data transfer with other protocols.

Stand-alone PROFIBUS Gateway Solutions

With connectivity to:
Modbus ( Master | Slave )
Modbus TCP/IP ( Master | Slave )
Modbus Plus ( Master | Slave )
DF1 ( Master | Slave )
DH-485 ( Master | Slave )
ASCII ( Slave )
EtherNet/IP ( Master | Slave )
DNP 3.0 ( Master | Slave )
A-B Remote I/O ( Master | Slave )
HART Multi-drop ( Slave )
Honeywell DE ( Slave )
ProLinx PROFIBUS Gateways

Wireless PROFIBUS DP Master

6104-WA-PDPM

  • Configured as a Class 1 PROFIBUS DP Master to interface with and control your PROFIBUS DP slave devices
  • Provides access to both standard and extended diagnostic information and provides freez/sync capability  
     

    Wireless PROFIBUS DP Slave

    6105-WA-PDPS

  • Configured to interface with your DP Master
  • Provides up to 244 bytes of read and up to 244 bytes write cyclic data
    • ProLinx Wireless PROFIBUS Gateways
    		  
    Home : Products : Support : Distributors : Services : News/Events : Contact : ProSoft Tested