Johnson Controls Metasys N2 Slave Interface Module
3150-N2
The 3150-N2 (SLC) is a single slot solution for AB 1746 I/O platforms. By providing configurable access to both ports, this product provides previously unavailable functionality and versatility. The N2 card provides the interface necessary to allow an Allen Bradley processor to be monitored and controlled over the Johnson Controls N2 link.
Features
Simple to Use
All module setup and operating control is performed over the backplane through simple ladder logic and data table configuration. The only software necessary is a standard ladder-programming package.
Hands Off Operation
Once the N2 card has been set up for operation, the card provides transparent control and monitoring capabilities. The N2 interface card and Allen Bradley processor combination forms a tightly integrated and practical solution.
Applications
Applications benefiting from the N2 card are prevalent in commercial building and energy management projects. Single or multiple processor applications will benefit through reduced installation costs and increased functionality.
Functional Specifications
- Warning and alarming functions performed on analog input and binary input data types
- Change of state response buffering
- Supported commands
|
0/9
|
Status update
|
|
1/1
|
Read analog input attributes
|
|
1/2
|
Read binary input attributes
|
|
1/3
|
Read analog output attributes
|
|
1/4
|
Read binary output attributes
|
|
2/1
|
Write analog input attributes
|
|
2/1
|
Write analog input attributes
|
|
2/2
|
Write binary input attributes
|
|
2/3
|
Write analog output attributes
|
|
2/4
|
Write binary output attributes
|
|
7/2/3
|
Override analog output
|
|
7/2/4
|
Override binary output
|
|
F
|
Identify device type
|
- Recognized and acknowledged commands by the 3150-N2, but do not impact the operation or return any data
|
0/0
|
Time update
|
|
0/4
|
Poll message no acknowledge
|
|
0/5
|
Poll message with acknowledge
|
|
0/8
|
Warm start
|
- All other commands return a bad command error code
Hardware Specifications
- Backplane current load
-
3150 module for SLC
- 5V @ 0.15 A
- 24 V @ 0.040 A
-
Operating temperature
- From 0° C to 60° C (32° F to 140° F)
-
Storage temperature
-From -40° C to 85° C (-40° F to 185° F)
-
Relative humidity
- From 5% to 95% (without condensation)
-
LED indicators
- Module Status
- Backplane transfer status
- Serial port TX/RX activity LED
- Serial port error LED status
-
Application Serial ports
- DB-25F - 3100 module
- DB-9M - 3150 module
- RS232/422/485 jumper selectable
- RS422/485 screw termination included (two per module)
- RS-232 hardware handshaking (RTS/CTS, DTR)
- 500 V Optical isolation from backplane
Ordering Information
| 3150-N2 |
Johnson Controls Metasys N2 Slave Interface Module |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
