PROFIBUS DP-V1 PS69 Slave Communication Module
PS69-DPS
The PS69-DPS module expands the functionality of Rockwell Automation's CompactLogix to include PROFIBUS DP-V0 and DP-V1 capability. The PS69-DPS is a more cost-effective option offering more features than the MVI69-PDPS, and supports both I/O control and messaging. Explicit ladder logic CIP message blocks provide slave status diagnostic data and acyclic messaging.
The PS69-DPS interface appears to the CompactLogix controller as a standard I/O module allowing it to be configured via RSLogix 5000, or configuration can be transferred from the Master to the PS69-DPS. For third-party configuration, a GSD file is supplied. The slave interface provides a diagnostic interface and has rotary switches for setting of the bus address. Complete program examples for simple and quick start-up are available.
Each module is equipped with LEDs to display communication and device status.
Features and Benefits
|
Features
|
Benefits
|
|
PROFIBUS Certified
|
Recognized quality certification mark
|
|
DP-V1 supported
|
Provides for acyclic messaging, extended diagnostics and extended data support
|
|
Ladder logic module configuration
|
Better Rockwell Automation integration using ladder logic software
|
Configuration
The GSD file supplied is sufficient to integrate the PS69-DPS as a PROFIBUS DP Slave into the configuration of any PROFIBUS Master. The PROFIBUS address is set by rotary switches. The slave configuration can be either transferred from the Master to the PS69-DPS or can be defined from the Logix application.
General Specifications
- Single-slot 1769 backplane compatible
- The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module
- Ladder logic is used for data transfer between module and processor. Sample ladder file included.
- Configuration data obtained from configuration text file downloaded to module. Sample configuration file included.
- Supports CompactLogix processors and MicroLogix 1500 LRP
Functional Specifications
|
Specification
|
Description
|
|
Master
|
According to IEC 61158
|
|
Slaves
|
max. 125 with the use of separate repeaters. 32 devices allowed per segment with up to 4 segments
|
|
Input data
|
max. 244 Bytes (*)
|
|
Output data
|
max. 244 Bytes (*)
|
|
DP-V0 & DP-V1 services
|
Fail Safe Mode, Global Control, Sync and Freeze, Watchdog, Read Request, Write Request, Alarm and Extended Diagnostics
|
|
GSD file
|
PSFT097A.gsd
|
(*) Can vary based on type of CompactLogix Controller and depends on total amount of I/O data of a CompactLogix System.
The maximum length of a bus segment depends on the baud rate used. Only PROFIBUS certified cable, preferably the cable type A, should be used.
Hardware Specifications
|
Specification
|
Description
|
|
Processor
|
EC1-160P with integrated ASPC2
|
|
PROFIBUS Interface
|
RS-485, max. 12 Mbps, potential free, according EN 50170
|
|
Diagnostic Interface
|
RS-232, PS/2 Mini-DIN female connector, 9600 Baud, non isolated
|
|
Power Supply
|
+5 V ±5 % / 260 mA
|
|
Max. Distance Rating
|
max. 6 modules to the power supply module
|
|
Dimensions
|
Standard 1769 Single-slot module
|
|
Burst
|
EN 61000-4-4, 2 kV, 5 kHz
|
|
Surge
|
EN 61000-4-5, 2 kV common mode, 1 kV differential mode
|
|
ESD
|
EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
|
|
Radiated/ Conducted Immunity
|
EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1 kHz sinewave
EN 61000-4-6, 10 V, 0,15...30 MHz
|
|
Radiated/ Conducted Emission
|
EN 55011 Class A
|
|
Vibration/Shock
|
IEC 600068-2-6, 10-150 Hz, 0.75 mm,
± 1 g, 1 Octave/min
IEC 600068-2-27, 15 g, 11 ms
|
|
Operating Temp.
|
0 to 60° C (32 to 140° F)
|
|
Relative Humidity
|
5 to 95% (non-condensing)
|
|
Agency Certification
|
C-UL certified, UL 508 listed, CE
|
|
PROFIBUS conformance
|
PNO certified
|
Ordering Information
| PS69-DPS |
PROFIBUS DP-V1 PS69 Slave Communication Module |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
|
