LMR-195 Type Cables
LMR-195
LMR-195 Type Cables are ideal for jumper assemblies in wireless communication systems and short antenna feed runs.
Features and Benefits
- Flexible: With a ½-inch minimum bend radius, the LMR-195 cable is substantially more flexible than RG-142 and very comparable to RG-58. The LMR-195 cable affords lower loss, greater shielding, and lower cost.
- Low Loss: LMR-195 boasts lower loss than other RG58/RG142 type cables. This is achieved through the use of a high velocity gas-injected closed cell foam dielectric, and bonded aluminum tape outer conductor.
- Weatherproof: The UV-protected black polyethylene jacket makes the cables rugged and resistant to the full range of outdoor environments. Various jacket materials are available to address other indoor and outdoor requirements.
- RF Shielding: The bonded aluminum tape outer conductor is overlapped to provide 100% coverage, resulting in >90 dB RF shielding (>180 dB crosstalk) and excellent interference immunity (ingress and egress); a substantial improvement from RG58s 40 dB and RG142s 60 dB performance level.
- Phase Stability: The intimately bonded structure and foam dielectric of LMR cables provide excellent phase stability over temperature and with bending. The high velocity dielectric results in superior phase stability as compared with RG58 and RG142 solid dielectric cables.
Mechanical Specifications
|
Minimum Bend Radius
|
0.5 in (12.7 mm)
|
|
Bending Movement
|
0.2 ft lbs (0.27 N-m)
|
|
Weight
|
0.021 lb/ft (0.03 kg/m)
|
|
Tensile Strength
|
40 lbs (18.2 kg)
|
|
Flat Plate Crush
|
15 lb/in (0.27 kg/mm
|
Environmental Specifications
|
InstallationTempRange
|
-40° / +185°F
-40° / +85°C
|
|
StorageTempRange
|
-94° / +185°F
-70° / +85°C
|
|
Operating TempRange
|
-40° / +185°F
-40° / +85°C
|
Electrical Specifications
|
Voltage Withstand
|
1000 VDC
|
|
Peak Power
|
2.5 kW
|
|
Jacket Spark
|
3000 VRMS
|
Attenuation Average @ 2500 MHz
|
dB/100 ft
|
dB/100 m
|
|
18.1
|
59.5
|
Attenuation Average @ 5800 MHz
|
dB/100 ft
|
dB/100 m
|
|
7.3
|
24.0
|
Ordering Information
| LMR-195 |
LMR-195 Type Cables |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
