IEC 61850 Client for ControlLogix®
What do you need help with?
Can any Prolinx module support com to SLC5/05 and 3 serial devices?
How can I connect more than one DF1 device to an Allen-Bradley processor's channel 0 port. You will need to use the serial port on a SLC505 to talk to 3 devices. Two of them are MicroLogix over
Read moreWhy is COM port 1 not available on the AppSrvCE unit?
The latest AppSrvCE platform, v1.23, includes ELO USB and serialtouch screen drivers. COM1 is allocated by the touch screen serialdriver, whether or not a serial touch screen is actually present ... Why is COM port 1 not available on the AppSrvCE unit?
Read moreHow can I monitor module and slave status with the MVI56-PDPV1 and other PDPMV1 PROFIBUS master modules?
The PDPMV1 operating state is stored in the MVIxxPDPMV1.Status.Fieldbus.FB_op_state tag: 00 = Offline 40 = Stop 80 = Clear C0 = Operate To determine slave status, the MVIxxPDPMV1.Status ... How can I monitor module and slave status with the MVI56-PDPV1 and other PDPMV1 PROFIBUS master modules?
Read moreCan any Prolinx module support com to SLC5/05 and 3 serial devices - Multiplexer
You need to use the serial port on a SLC505 to talk to 3 devices. Two of them are ulogix over radio modems using DF1 protocol. The 3rd is a medina telemetry unit which supports DF1 point
Read moreDebug port connection parameters for Prosoft modules and gateways
bits: 8 parity: none stop bits: 1 flow control: Xon/Xoff Once connected, press "?" to display debug menu.
Read more