The factory default configuration of the AppSrvCE Ethernet Ports is as Follows:
Left Port: IP = 192.168.0.1 NetMask = 255.255.255.0
Right Port: IP = Is obtained using DHCP
The easiest way to connect to an AppServer is to connect using the left port, and then configure both ethernet ports for your application.
Article ID: 320
Created On: Thu, Jan 25, 2007 at 1:46 PM
Last Updated On: Mon, Jun 30, 2014 at 11:01 PM
Authored by: Administrator
Online URL: https://www.prosoft-technology.com/kb/article.php?id=320