How do I set the IP Address in an AN-X Gateway
Most AN-X gateways require the use of the AnxInit.exe utility to set the IP Address or to change the firmware in the gateway.
Note: For AN-X2 gateways the IP address is changed from the gateway's web page.
Article ID: 488
Created On: Wed, Jun 18, 2014 at 11:06 PM
Last Updated On: Thu, Jun 19, 2014 at 3:09 PM
Authored by: Administrator
Online URL: https://www.prosoft-technology.com/kb/article.php?id=488