How to figure out what the IP Address of an AN-X2 gateway is?
There are 2 ways to determine the current IP Address of an AN-X2 gateway.
If AnxInit is installed on the PC, then AN-X2 modules will respond to the locate all query that can be found under the Utilities menu. (Note: AnxInit is not able to configure the IP Address of an AN-X2 gateway)
Power down the AN-X2 gateway and carefully remove the mSD card from the back of the unit. Then install the mSD card into the SD card adapter and place that into a computer (if prompted to fix the mSD card select Continue without scanning). In the root of the mSD card find a file named Config.txt. This file will show the current IP configuration.
Article ID: 533
Created On: Mon, Sep 29, 2014 at 5:45 PM
Last Updated On: Mon, Sep 29, 2014 at 5:45 PM
Authored by: Administrator