Modbus RTU to JCI Metasys N2 QuickServer Gateways
PS-QS-1x10-0117
QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.
System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.
The user can preselect two Building Automation System (BAS) drivers (serial, Ethernet and/or LonWorks) to be loaded on the QuickServer at no extra charge. Additional drivers are available at extra cost. Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP®, BACnet MS/TP, LonWorks® and JCI Metasys® N2. QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer.
Features and Benefits
- Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
- Multi-configuration capability; specific configurations selectable via DIP switches or software
- DIN rail mount included with gateway
- DIP switches to select baud rate or node ID on the fly
- BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)
Specifications
Field Connections
- Ethernet 10/100 RJ45
- Two Serial RS-485 terminal (up to 115K baud)
Other
- Configuration/Diagnostic utilities
- Capacity: 250 or 500 Points
- Table, Wall or DIN rail mount
Hardware
Field Connections
- Ethernet 10/100 RJ45
- Serial RS-485 terminal (up to 115K baud)
- FTT-10 LonWorks port
Environment
- Operating temperature: -40°F to 167°F (-40°C to 75°C)
- Relative humidity: 5% to 90% RH, with no condensation
Power Requirements
- 9 to 30 Vdc or Vac or 5 Vdc
- Current draw 279mA @ 12Vdc
Other
- Configuration/Diagnostic utilities
- Capacity: 250 or 500 Points
- Table, Wall or DIN rail mount
Physical Dimensions (WxDxH)
- 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
- 0.4 lbs (0.2 Kg)
Approvals
- TUV approved to UL 916 standard
- CE Mark
- BTL Mark (PS-QS-1010)
- RoHS Compliant
- FCC Part 15 Compliant
Downloads
| PS-QS-1x10-0117 Datasheet | 383.61 kB | Last Modified 12/09/2022 |
| QuickServer Setup Guide | 2.84 MB | Last Modified 07/27/2020 |
| Protocol Driver and Configuration Manual PS-QS-1x10-0117 | 3.33 MB | Last Modified 11/03/2020 |
| SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) | 17.04 MB | Last Modified 09/11/2015 |
| FieldServer Toolbox Setup | 12.05 MB | Last Modified 07/27/2020 |
| LifeCycle Letter FieldServer Gateways | 141.87 kB | Last Modified 04/14/2023 |
Certifications
| Declaration of Conformity (RoHS\CE) | 426.18 kB | Last Modified 12/17/2020 |
| Declaration of REACH Compliance | 593.33 kB | Last Modified 12/17/2020 |
| UKCA Certification | 327.80 kB | Last Modified 05/12/2022 |