The DeviceNet Router provides a powerful and easy to configure solution to exchange data between DeviceNet™ devices and a Logix controller or PanelView via EtherNet/IP™. The module is able to asynchronously exchange data between a DeviceNet polling master (scanner) and an Ethernet PCCC device. Produced and consumed data sizes are independently configurable from 0 to 128 bytes each.
The consumed (DeviceNet) data can then be mapped to a PLC5 type address file, e.g. N33, and then read by an Ethernet device e.g. a PanelView. Similarly, the produced data (DeviceNet) can also be mapped to a PLC5 type address file, to which an Ethernet device could write. The Router supports transferring parameters from a DeviceNet device directly to Logix tags. The scaling of the parameter values will either be extracted from the EDS file imported or can be manually updated by the user. The module also provides a range of statistics and an on-board DeviceNet traffic analyzer to assist with fault finding. A built-in webserver provides detailed diagnostics of system configuration and operation, including the display of DeviceNet operation and communication statistics, without the need for any additional software.
The Slate Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the DeviceNet Router module, connections with controllers and devices.
EtherNet/IP Network
Specification |
Description |
Connector |
RJ45 |
Conductors |
CAT5 STP/UTP |
ARP Connections |
Max 20 |
TCP Connections |
Max 20 |
CIP Connections |
Max 10 |
Communication Rate |
10/100 Mbps |
Duplex Mode |
Full / Half |
Auto-MDIX Support |
Yes |
DeviceNet Network
Specification |
Rating |
Connector |
5-way terminal, 5.08 mm pitch. |
Conductors |
12 to 30 AWG |
Baud Rate |
125k, 250k, 500k |
IO Messaging |
Polled Change of State (COS) |
Unconnected Message Manager (UCMM) |
Yes |
Max Explicit Connections |
5 |
PCCC Network
Specification |
Description |
Max PCCC Connections |
10 |
Max PCCC Payload |
1000 bytes |
Specification |
Rating |
Power Supply |
Input: 10 to 28 VDC, (70 mA @ 24VDC) |
Power Consumption |
1.7 W |
Dimensions (H x W x D) |
101.0 x 22.5 x 120.0 mm |
Connector |
5-way terminal, 5.08 mm pitch. |
Conductors |
24 to 18 AWG |
Enclosure Rating |
IP20, NEMA/UL Open Type |
Temperature |
-20 to 70 °C |
Humidity |
0 to 95% RH, non-condensing |
Earth Connection |
Yes, terminal based |
Emissions |
IEC61000-6-4 |
ESD Immunity |
EN 61000-4-2 |
Radiated RF Immunity |
IEC 61000-4-3 |
EFT/B Immunity |
IEC 61000-4-4 |
Surge Immunity |
IEC 61000-4-5 |
Conducted RF Immunity |
IEC 61000-4-6 |
CE Declaration of Conformity (CE, UKCA, RoHS, UL) | 336.73 kB | Last Modified 03/09/2023 |
UL/cUL; Class1, Div 2 | 233.29 kB | Last Modified 03/09/2023 |