EtherNet/IP to BACnet MS/TP or BACnet/IP QuickServer Gateways
PS-QS-1x10-0780
FieldServer’s EtherNet/IP™ to BACnet/IP® or BACnet MS/TP QuickServer communication gateways allows high-speed bi-directional data transfers between EtherNet/IP™ enabled controllers or devices and BACnet/IP® or BACnet MS/TP controllers or devices.
These gateways come in other wise functionally identical 250 data point (PS-QS-1010-0780) and 500 data point (PS-QS-1510-0780) variations and require no additional software purchase for configuration or diagnostics. The introduction of the free FieldServer Toolbox software and built in web GUI has dramatically simplified gateway discovery, configuration uploading and downloading, and accessing communication diagnostics. Further, the addition of both improved, more detailed, sample configuration files, as well as our step by step tutorial video, has made first time commissioning easier than it’s ever been!
Features and Benefits
- Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
- Multi-configuration capability; specific configurations selectable via DIP switches or software
- DIN rail mount included with gateway
- DIP switches to select baud rate or node ID on the fly
- BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX)
Specifications
Field Connections
- Ethernet 10/100 RJ45
- Two Serial RS-485 terminal (up to 115K baud)
Environment
- Operating temperature: -40°F to 167°F (-40°C to 75°C)
- Relative humidity: 5% to 90% RH, with no condensation
Power Requirements
- 9 to 30 Vdc or Vac or 5 Vdc
- Current draw 150mA @ 12VOther
- Configuration/Diagnostic utilities
- Capacity: 250 or 500 Points
- Table, Wall or DIN rail mount
Physical Dimensions (WxDxH)
- 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
- 0.4 lbs (0.2 Kg)Approvals
- TUV approved to UL 916 standard
- CE Mark
- BTL Mark (PS-QS-1010)
- RoHS Compliant
- FCC Part 15 Compliant
Hardware
Field Connections
- Ethernet 10/100 RJ45
- Serial RS-485 terminal (up to 115K baud)
- FTT-10 LonWorks port
Environment
- Operating temperature: -40°F to 167°F (-40°C to 75°C)
- Relative humidity: 5% to 90% RH, with no condensation
Power Requirements
- 9 to 30 Vdc or Vac or 5 Vdc
- Current draw 279mA @ 12Vdc
Other
- Configuration/Diagnostic utilities
- Capacity: 250 or 500 Points
- Table, Wall or DIN rail mount
Physical Dimensions (WxDxH)
- 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
- 0.4 lbs (0.2 Kg)
Approvals
- TUV approved to UL 916 standard
- CE Mark
- BTL Mark (PS-QS-1010)
- RoHS Compliant
- FCC Part 15 Compliant
Downloads
| PS-QS-1x10-0780 Datasheet | 436.67 kB | Last Modified 03/18/2015 |
| Sample Configurations | 40.96 kB | Last Modified 12/22/2017 |
| Product Datasheet & Manual Collection | 6.01 MB | Last Modified 12/22/2017 |
| QuickServer Setup Guide | 1.67 MB | Last Modified 07/08/2013 |
| FieldServer Toolbox Setup | 10.55 MB | Last Modified 12/22/2017 |
| SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) | 17.04 MB | Last Modified 09/12/2015 |
Certifications
| Declaration of Conformity (RoHS\CE) | 255.62 kB | Last Modified 07/24/2018 |