Configuration

ProSoft Configuration Builder

I/O Size

240/240 - 16 bit integers

Floating Point Data

Floating point data movement supported including configurable support for Enron, Daniel®, and other implementations

Modbus Function Codes Supported

1: Read Coil Status
2: Read Input Status
3: Read Holding Registers
4: Read Input Registers
5: Force (Write) Single Coil
6: Preset (Write) Single Holding Register
8: Diagnostics (Slave Only, Responds to Subfunction 00)
15: Force( Write) Multiple Coils
16: Preset (Write) Multiple Holding Registers
17: Report Slave ID (Slave Only)
22: Mask Write Holding Register (Slave Only)
23: Read/Write Holding Registers (Slave Only)

Client Connections

10

Command List

Up to 16 command per Client connection, each fully

configurable for function, slave address, register to/from addressing and word/bit count.

Command Control

Configured commands can be controlled directly from ladder logic

Polling of command list

Configurable polling of command list, including continuous and on change of data, and dynamically user or automatic

enabled.

Status Data

Error codes available on an individual command basis. In addition, a slave status list is maintained per active Modbus Client

Server Connections

2, (1 MBAP and 1 Encapsulated)

Status Data

Error codes, counters and port status available per configured server

Dimensions

Standard 1769 Single-slot module

Current Load

450 mA max @ 5 VDC
Power supply distance rating of 4

Operating Temp.

32° F to 140° F (0° C to 60° C)

Storage Temp.

-40° F to 185° F (-40° C to 85° C)

Relative Humidity

5% to 95% (with no condensation)

LED Indicators

Battery and Module Status
Application Status
Ethernet Port Activity
CFG Port Activity

Eth-1

10/100 Ethernet Port
Used for Debugging and Application Code