LonWorks QuickServer Gateways
PS-QS-1x11-F
The QuickServer line of communication gateways are designed to link building automation networks utilizing LonWorks with industrial control networks communicating on BACnet/IP, EtherNet/IP, Modbus TCP/IP, and Modbus RTU. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.
QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.
System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.
Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP®, BACnet MS/TP, LonWorks® and JCI Metasys® N2. QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer.
Architectures
|
Features and Benefits
- Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
- Multi-configuration capability; specific configurations selectable via DIP switches or software
- DIN rail mount included with gateway
- DIP switches to select baud rate or node ID on the fly
- BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)
Specifications
Field Connections
- Ethernet 10/100 RJ45
- Serial RS-485 terminal (up to 115K baud)
- FTT-10 LonWorks port
Other
- Configuration/Diagnostic utilities
- Capacity: 250 or 500 Points
- Table, Wall or DIN rail mount
Approvals
- TUV approved to UL 916 standard
- CE Mark
- BTL Mark (PS-QS-1010)
- RoHS Compliant
- FCC Part 15 Compliant
Hardware
Environment
- Operating temperature: -40°F to 167°F (-40°C to 75°C)
- Relative humidity: 5% to 90% RH, with no condensation
Power Requirements
- 9 to 30 Vdc or Vac or 5 Vdc
- Current draw 250mA @ 12V
Physical Dimensions
- W x D x H: 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
- 0.4 lbs (0.2 Kg)
Downloads
| PS-QS-1x11-F Datasheet | 168.57 kB | Last Modified 08/09/2023 |
| QuickServer Setup Guide | 2.84 MB | Last Modified 07/27/2020 |
| FieldServer Toolbox Setup | 12.05 MB | Last Modified 07/27/2020 |
| SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) | 17.04 MB | Last Modified 09/11/2015 |
| Protocol Driver and Configuration Manual PS-QS-1x11-F | 4.70 MB | Last Modified 08/09/2023 |
Certifications
| Declaration of Conformity (RoHS\CE) | 426.18 kB | Last Modified 12/17/2020 |
| Declaration of REACH Compliance | 593.33 kB | Last Modified 12/17/2020 |
| UKCA Certification | 327.80 kB | Last Modified 05/12/2022 |
| BACnet Conformance Certificate | 1.15 MB | Last Modified 10/09/2024 |