Number of Class 3 Server Connections

5

Supported PLC Types 

PLC2, PLC5, SLC, CLX, CMPLX 

Supported Message Types

PCCC and CIP

Number of Class 3 Client Connections

Connected - 2
Unconnected - 1

Number of Class 1 I/O Connections

8

Max I/O connection sizeIn/Out

496/496 bytes

Max RPI time

10 ms per connection

CIP Services Supported 

0x4C - CIP Data Table Read
0x4D - CIP Data Table Write

Command List

Support for 100 commands per Client, each configurable 
for command type, IP address, register to/from addressing
and word/bit count.

Command Sets 

PLC-2/PLC-3/PLC5 Basic Command Set
PLC5 Binary Command Set
PLC5 ASCII Command Set
SLC500 Command Set

Power Supply

24 VDC nominal
10 to 36 VDC allowed
Positive, Negative, GND Terminals

Current Load 

24 VDC nominal @ 300 mA
10 to 36 VDC @ 610 mA maximum 

Operating Temperature 

-25°C to 70°C (-13°F to 158°F)

Storage Temperature 

-40°C to 80°C (-40°F to 176°F)

Shock 

IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)

Vibration

IEC 60068-2-6; 5G @ 10 to 150 Hz

Relative Humidity

5% to 95% RH with no condensation

Dimensions (H x W x D)

5.38 x 1.99 x 4.38 in
13.67 x 5.05 x 11.13 cm

LED Indicators 

Configuration (CFG), Error (ERR), Power (PWR), 
Hardware Fault (FLT), Network Status (NS), 
EtherNet/IP™ Class I or Class III Connection Status 
(EtherNet/IP Only) Module Status (MS), ModuleConfiguration
Status (EtherNet/IP Only) Ethernet Communication
Port Link/Activity, and 100 mbit

Ethernet Port

10/100Mbit half-duplex RJ45 Connector Electrical Isolation
1500 Vrms at 50 to 60 Hz for 60 seconds, applied as
specified in section 5.3.2 of IEC 60950: 1991 Ethernet
Broadcast Storm Resiliency is less than or equal to
5000 [ARP] frames-per-second and less than or equal to
5 minutes duration

Shipped With Each Unit

2.5 mm screwdriver
J180 Power Connector