ProSoft Technology’s Modbus® TCP/IP to Modbus® Serial four-port Serial gateway allows high-speed bi-directional data transfers between Modbus® TCP/IP-enabled PACs and Modbus® Serial devices. Modbus® Serial devices are widely used in nearly every industry and include SCADA systems and Power Monitors. Four Serial ports allow for connectivity of up to 400 Modbus® Serial devices, reducing the amount of gateways required for your application.
In addition, the gateway includes several features that allow for simplified integration, reduced commissioning time and optimized performance.
A conformal coating option is available for this product.
Specification |
Description |
|
Supported Modbus Function Codes |
1: Read Coil Status |
15: Force (Write) Multiple Coils |
Supported Clients |
10 |
|
Supported Servers |
MBAP: 5 |
|
Command List |
Up to 160 fully configurable Client commands |
|
Status Data |
Error codes reported individually for each command |
|
Command List Polling |
Each command can be individually enabled or disabled; |
Specification |
Description |
|
Command List |
Up to 100 commands per Master port, each fully configurable for Function Code, slave address, register to/from addressing and word/bit count. |
|
Supported Modbus Function Codes |
1: Read Coil Status |
15: Force (Write) Multiple Coils |
Software configurable communication parameters |
Baud rate: 110 baud to 115.2 kbps |
|
Polling of Command List |
Configurable polling of command list, including continuous and on change of data, and dynamically user or automatic enabled. |
|
Status Data |
Error codes available on an individual command basis. In addition, a slave status list is maintained |
|
Node Address |
1 to 247 (software selectable) |
|
RS Interface |
RS232, RS422, and RS485 |
|
Transmit and Receive Buffer Size |
255 byte Transmit character length with 0 to 65535 millisecond delay between each transmitted character |
Specification |
Description |
Power Supply |
24 VDC nominal |
Current Load |
24 VDC nominal @ 300 mA |
Operating Temperature |
-25°C to 70°C (-13°F to 158°F) |
Storage Temperature |
-40°C to 80°C (-40°F to 176°F) |
Shock |
IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational) |
Vibration |
IEC 60068-2-6; 5G @ 10 to 150 Hz |
Relative Humidity |
5% to 95% RH with no condensation |
Dimensions (H x W x D) |
5.38 x 1.99 x 4.38 in |
LED Indicators |
Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), Module Configuration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit Serial Communication Port Receive (RX) and Transmit (TX) |
Ethernet Port |
10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency is less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration |
Number of Serial Ports |
4 |
Serial Port Isolation |
2500 Vrms port signal isolation per UL 1577 serial port communication signal uses RF (Radio Frequency) modulation signal as isolation media, IC chip model is SiliconLabs Si844x (Si8440,Si8441,Si8442) |
Shipped With Each Unit |
2.5 mm screwdriver |
ATEX Letter of Conformity | 107.32 kB | Last Modified 05/12/2022 |
CB Safety | 348.30 kB | Last Modified 10/20/2022 |
UL Certificate of Compliance | 233.35 kB | Last Modified 11/16/2022 |
Declaration of Conformity (RoHS/CE) | 114.24 kB | Last Modified 06/01/2022 |
Korean KC Registration | 974.32 kB | Last Modified 07/07/2020 |
Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1.92 MB | Last Modified 07/10/2020 |
Declaration of REACH Compliance | 145.49 kB | Last Modified 06/01/2022 |