The ProSoft Technology RCL50-50-xxxM Radiating Cable is specially designed to radiate 802.11g and 802.11n RF signals operating in the spread spectrum 2.4 GHz band.
Acting as a long, flexible antenna, the Radiating Cable may be installed along monorail systems, overhead cranes and through tunnels to propagate wireless data signals in situations tough for traditional antenna systems.
The cable is pre-terminated with N-Female connectors saving time during installation. It also includes the proper number and type of hangers to facilitate your installation. It is available in multiple lengths to meet the needs of your application.
Specially tested with ProSoft Technology 802.11 Fast Industrial Hotspots utilizing Fast Roam Technology, the Radiating Cable product line offers reliable and flexible options in challenging RF environments.
Size |
1.27 cm (0.5 in) |
Frequency Range |
Up to 2.9 GHz |
Connectors |
Two (2) N-Female jack |
Jacket |
Halogen-free low smoke flame retardant |
Slot Design |
Groups of slots at short intervals |
Indication of Slot Alignment |
Sheath marking (180º) |
Impedance |
50 Ohm |
Typical Attenuation |
7.32 dB/100 m (2.22 dB/100 ft) |
Velocity Ratio |
88% |
Capacitance |
76 pF/m |
Dielectric Material |
Cellular polyethylene |
Diameter Inner Conductor |
4.8 mm (0.19 in) |
Diameter Dielectric |
12.4 mm (0.49 in) |
Diameter over Jacket |
15.5 mm (0.61 in) |
Minimum Bending Radius (single bend) |
200 mm (7.87 in) |
Recommended Hanger/Clamp Interval |
One per meter (3.3 ft) |
Storage Temperature |
-70 to +85ºC (-94 to +185ºF) |
Installation Temperature |
-25 to +60ºC (-13 to +140ºF) |
Operating Temperature |
-40 to +85ºC (-40 to +185ºF) |
RCL50-50-xxxM Datasheet | 231.74 kB | Last Modified 04/01/2014 |
Radiating Cable Installation Guide | 4.70 MB | Last Modified 03/11/2020 |