The DeviceNet Router/B provides a powerful and easy to configure solution to exchange data between DeviceNet™ and EtherNet/IP™, Modbus TCP/IP or Modbus RTU networks.
The module can be configured as a DeviceNet Scanner or a DeviceNet Device - allowing the user to not only integrate DeviceNet devices into a Logix or Modbus system, it also allows EtherNet/IP or Modbus devices in an existing DeviceNet network.
The DeviceNet Router B is configured using the Slate Configuration Utility software tool.
The DeviceNet Router B includes a web server to display DeviceNet operation and communication statistics and advanced diagnostics functions like built-in packet capture for the various protocols. The router has two Ethernet ports to support Device-Level-Ring (DLR) architectures
The Slate Configuration Utility software is used for the configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the DeviceNet Router module, connections with controllers and devices.
DeviceNet Network
Specification |
Description |
Connector |
5-way terminal, 5.08 mm pitch. |
Modes |
Scanner, Target (or Device) |
Baud Rate |
125k, 250k, 500k |
DeviceNet Terminator |
120 Ω (Software enabled) |
DeviceNet Scanner
Specification |
Description |
Device Count |
63 |
Set Target Device Node |
Supported |
Set Target Device Baud Rate |
Supported |
Device Discovery |
Supported |
Explicit Messaging |
Supported |
Supported Connections |
Poll, Change of State (COS) |
DeviceNet Target
Specification |
Description |
Supported Connections |
Poll, Change of State (COS) |
Input / Output Data Max |
256 bytes input or output, per message |
PCCC Network
Specification |
Description |
Max PCCC Connections |
10 |
Max PCCC Payload |
1000 bytes |
EtherNet/IP Network
Specification |
Description |
Connector |
RJ45 |
Conductors |
CAT5 STP/UTP |
ARP Connections |
Max 100 |
TCP Connections |
Max 100 |
CIP Connections |
Max 15 |
Communication Rate |
10/100 Mbps |
Duplex Mode |
Full / Half |
Auto-MDIX Support |
Yes |
Embedded switch |
Yes, 2 x Ethernet ports |
Device Level Ring (DLR) |
Yes |
Network Time Protocol (NTP) |
Yes |
EtherNet/IP Originator
Specification |
Description |
Class 1 Cyclic Connections Supported |
Yes |
Class 3 / UCMM Connections Supported |
Yes |
Class 1 connection count |
10 |
Class 3 / UCMM Target Device Count |
10 |
Class 3 / UCMM Mapping Count |
50 |
EtherNet/IP Target
Specification |
Description |
Class 1 Cyclic connection count |
4 |
Logix Direct-To-Tag supported |
Yes |
Modbus Client
Specification |
Description |
Modes |
Modbus TCP/IP, Modbus RTU (RS232 and 485) |
Modbus RS485 Termination |
125 Ω (Software enabled) |
Maximum Modbus Server Devices |
20 |
Maximum Modbus Registers mapped |
100 |
Modbus address Range supported |
0 to 65535 of each type (Holding/Input Register, Input/Coil Status) |
Base Offset |
Modbus (Base 0) ; PLC (Base 1) |
Configurable Modbus TCP port |
Yes |
Data Reformatting Supported |
BB AA BB AA DD CC CC DD AA BB DD CC BB AA |
Modbus Server
Specification |
Description |
Modes |
Modbus TCP/IP, Modbus RTU (232 and 485) |
Modbus RS485 Termination |
Software set |
Modbus address Range supported |
0 to 65535 of each type (Holding/Input Register, Input/Coil Status) |
Base Offset |
Modbus (Base 0) ; PLC (Base 1) |
Configurable Modbus TCP/IP port |
Yes |
Serial Port (RS232)
Specification |
Description |
RS232 Connector |
9-way terminal (shared with RS485) |
RS232 Conductor |
24 – 18 AWG |
Electrical Isolation |
1000 VDC |
Baud Rates |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
Parity/Data Bits/Stop Bits |
None, Even, Odd / 8 / 1 |
Serial Port (RS485)
Specification |
Description |
RS232 Connector |
9-way terminal (shared with RS485) |
RS232 Conductor |
24 – 18 AWG |
Electrical Isolation |
1500 Vrms (1 minute, maximum) |
Baud Rates |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
Parity/Data Bits/Stop Bits |
None, Even, Odd / 8 / 1 |
Specification |
Description |
Power Supply |
Input: 10 to 32 VDC, (85 mA @ 24 VDC and 180mA @ 10 VDC) |
Power Consumption |
2.2 W |
Dimensions |
149.0 x 34.0 x 116.0 mm (H x W x D) |
Connector |
3-way terminal |
Conductors |
24 to 18 AWG |
Enclosure Rating |
IP20, NEMA/UL Open Type |
Temperature |
-20 to 70 °C |
Humidity |
0 to 95% RH, non-condensing |
Earth Connection |
Yes, terminal based |
Emissions |
IEC61000-6-4 |
ESD Immunity |
EN 61000-4-2 |
Radiated RF Immunity |
IEC 61000-4-3 |
EFT/B Immunity |
IEC 61000-4-4 |
Surge Immunity |
IEC 61000-4-5 |
Conducted RF Immunity |
IEC 61000-4-6 |
UL/cUL; Class1, Div 2 | 238.99 kB | Last Modified 01/25/2024 |
CE Declaration of Conformity (CE, UKCA, RoHS, UL) | 339.65 kB | Last Modified 01/26/2024 |
ATEX Letter Of Conformity | 101.09 kB | Last Modified 10/13/2023 |