ProSoft Technology’s Modbus® TCP/IP to Siemens Industrial Ethernet gateway allows high speed bi-directional data transfers between Schneider Electric® PACs and Siemens S7 and S5 PACs.
Two ports allow each protocol to reside on separate subnets, allowing you to pass data between the two subnets without changing each device’s IP address.
Specification |
Description |
Supported Modbus Function Codes |
1: Read Coil Status |
Supported Clients |
10 |
Supported Servers |
MBAP: 5 |
Command List |
Up to 160 fully configurable Client commands |
Status Data |
Error codes reported individually for each command |
Command List Polling |
Each command can be individually enabled or disabled; |
Specification |
Description |
Supported PLC Data Exchange (Read and Write) |
Siemens S7-200, S7-300, S7-400, S7-1200, S7-1500 |
Supported Register Types |
DB, Inputs, Outputs, Flags, Counters, Timers |
Supported Clients |
20 |
Specification |
Description |
Power Supply |
24 VDC nominal 10 to 36 VDC allowed Positive, Negative, GND Terminals |
Current Load |
24 VDC nominal @ 300 mA 10 to 36 VDC @ 610 mA maximum |
Operating Temperature |
-25°C to 70°C (-13°F to 158°F) |
Storage Temperature |
-40°C to 80°C (-40°F to 176°F) |
Relative Humidity |
5% to 95% RH with no condensation |
Dimensions (H x W x D) |
5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm |
ATEX Letter of Conformity | 107.32 kB | Last Modified 05/12/2022 |
Korean KC Registration | 974.32 kB | Last Modified 07/07/2020 |
Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1.92 MB | Last Modified 07/10/2020 |
Declaration of Conformity (RoHS/CE) | 114.24 kB | Last Modified 06/01/2022 |
Declaration of REACH Compliance | 145.49 kB | Last Modified 06/01/2022 |