4 Channel HART Output Module
PLX51-HART-4O
The PLX51-HART-4O allows users to easily connect their existing HART-compatible field devices to EtherNet/IP™, Modbus® TCP/IP, and DNP3 Ethernet networks.
The module can be used to connect HART Output devices such as valve positioners into an Ethernet network. The PLX51-HART-4O supports up to 4 channels of HART communication, as well as Analog 4-20 mA signals for real-time process variables to/from the HART-compatible device.
Architectures
|
Features and Benefits
- Support for point-to-point networks with EtherNet/IP, Modbus TCP/IP or DNP3 (TCP/UDP) protocols
- EtherNet/IP enables a HART device to be added directly into a Rockwell Automation® Logix I/O tree
- Modbus TCP/IP enables a HART field device to be viewed as a Modbus Slave device
- DNP3 converts a HART field device into a DNP3 Outstation (slave) supporting Secure Authentication
- Support for point-to-multipoint network, maximum of 5 devices with EtherNet/IP protocol
- DTM (Device Type Manager) / HART Pass-through is available for further simplifying device configuration and management using an FDT frame
- Built-in Web server provides detailed diagnostics of system configuration and operation as well as field device diagnostics
- Can be used in a redundant ControlLogix® controller system
- Advanced Diagnostics automatically extracted and written to Logix Tags
Specifications
HART 4 Channel Output
| Specification | Description |
| Number of Channels | 4 |
| DAC Resolution | 16 bit |
| Accuracy (Calibrated 25°C) | < 0.15 % |
| Accuracy (Uncalibrated) | < 0.30 % |
| Range | 0 to 22 mA |
| Drive |
50 to 1170 Ω Resistive |
EtherNet/IP
| Specification | Description |
| Connector | RJ45 |
| Conductors | CAT5 STP/UTP |
| ARP Connections | Max 20 |
| TCP Connections | Max 20 |
| CIP Connections | Max 10 |
| Communication Rate | 10/100 Mbps |
| Duplex Mode | Full / Half |
| Auto MDIX | Yes |
Modbus TCP/IP
| Specification | Description |
|
Function Codes |
1: Read Coils |
DNP3
| Specification | Description |
| Mode Supported | DNP3 Outstation |
| Application Functions Supported |
Read |
| Unsolicited Response Supported | No |
| DNP3 Events Supported | No |
DNP3 Secure Authentication
| Specification | Description |
| Key Change Method Supported | Pre-shared |
| MAC Algorithms Supported |
HMAC SHA-1 encryption (4 octets, serial) – for legacy support |
| Key Wrap Algorithms Supported |
AES-128 Key Wrap |
| Aggressive Mode Supported | No |
Hardware
Physical Specifications
| Specification | Description |
| Enclosure Rating | IP20, NEMA/UL Open Type |
| Temperature | -20 to 70 °C |
| Earth connection | Yes, terminal based |
| Emissions | IEC 61000-6-4 |
| ESD Immunity | EN 61000-4-2 |
| Radiated RF Immunity | IEC 61000-4-3 |
| EFT/B Immunity | EFT: IEC 61000-4-4 |
| Surge Immunity | Surge: IEC 61000-4-5 |
| Conducted RF Immunity | IEC 61000-4-6 |
Hardware Specifications
| Specification | Description |
| Enclosure | Plastic |
| Dimensions (H x W x D) | 101 x 22.5 x 120 mm |
| Power Requirements | 12 to 28 VDC 35mA @ 24 VDC - With no field devices attached 130mA @ 24 VDC - With 4 field devices at 22mA each 64mA @12 VDC - With no field devices attached 160mA @ 12 VDC - With 4 field devices at 22mA each |
| Power Consumption |
0.9 W - With no field devices attached |
| Power Connector | 3-way terminal |
| Connector (Analog) | 2-way terminal |
| Conductors | 24 to 18 AWG |
Certifications
| CB Safety | 350.20 kB | Last Modified 12/05/2018 |
| UL NoA Certification | 51.06 kB | Last Modified 12/05/2018 |
| Ex Certificate (ATEX Directive) | 84.70 kB | Last Modified 12/05/2018 |
| Declaration of Conformity (RoHS/CE) | 297.76 kB | Last Modified 12/05/2018 |
| ODVA EtherNet/IP Declaration of Conformity | 700.18 kB | Last Modified 12/05/2018 |