- Solutions
- Products
- Services & Support
-
News & Events
- ProSoft Insights (Blog)
- Podcast
- AOI: Module communication is integrated within Studio/RSLogix 5000 using a sample Add-On Instruction (AOI), or sample ladder logic file, reducing commissioning time.
- Autoscan: The new Autoscan feature reduces start up times and simplifies troubleshooting by scanning the PROFIBUS network and uploading slave device addresses and configuration information. (Reads and maps nodes automatically to the module.)
- ComDTM: Allows remote Ethernet connectivity with Asset Management Software significantly lowering maintenance costs. You can configure, commission, maintain and diagnose your fieldbus devices throughout their entire lifecycle with this comprehensive, fully integrated engineering and maintenance environment.
- SD card slot (SD card optional) is used for storing configuration files in the event of a disaster. It can also be used to update the firmware of the module without the need of a 1769 CPU.
PROFIBUS DPV1 Master for CompactLogix
ILX69-PBM
The ILX69-PBM PROFIBUS DPV1 Master module provides all the advantages of in-chassis PROFIBUS communication, such as the inclusion of an AOI and the Autoscan features which greatly reduce your commissioning time, and ComDTM that provides remote Ethernet connectivity with asset management software.
With these modules, CompactLogix™ processors can easily communicate with slave devices supporting PROFIBUS DPV0 and DPV1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.
Check out a successful application with this module: Help CIP System Communicate.
Architectures
Click on image(s) to enlarge
Features and Benefits
Specifications
PROFIBUS DP Specifications
Specification
Description
Slaves
Maximum 125
Input/Output
Maximum 244 Bytes per Slave
Input Data
Maximum 5712 Bytes
Acyclic Data
DPV1
Status data
88 Bytes
Output data
Maximum 5760 Bytes
DPV1 services
Class 1 Read/Write
Class 1 Alarm
Class 2 Initiate/Read/Write/Data transport/AbortServices
Global-Control, Slave-Diagnostic, Set-Parameter
Sync, Freeze Command
Supported
Baud rate
9.6 kBaud,
19.2 kBaud,
45.45 kBaud,
93.75 kBaud,
187.5 kBaud,
500 kBaud,
1.5 MBaud,
3 MBaud,
6 MBaud,
12 MBaudAuto-detection mode is supported
Hardware Specification
Specification
Description
PROFIBUS Interface
RS-485, max. 12 Mbps, potential free, according
EN 50170Diagnostic Interface
10/100 Ethernet, RJ45
Power Supply
+5 V ±5 % / 570 mA
Max. Distance Rating
2 slots
Dimensions
Standard 1769 Single-slot module
Burst
EN 61000-4-4, 2 kV, 5 kHz
Surge
EN 61000-4-5, 2 kV common mode, 1 kV differential mode
ESD
EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Radiated/Conducted Immunity
EN 61000-4-3, 10 V/m, 30 ...1000 MHz, 80% AM, 1 kHz sine wave
EN 61000-4-6, 10 V, 0,15 ...30 MHz
Radiated/Conducted Emission
EN 55011 Class A
Vibration/Shock
IEC 600068-2-6, 10-150 Hz, ± 0,75 mm, ± 1 g, 1 Octave/min
IEC 600068-2-27, 15 g, 11 ms
Operating Temperature
0°C to 60°C (32°F to 140°F)
Relative Humidity
5 to 95% (non-condensing)
PROFIBUS conformance
Certified
Certifications
ATEX Letter of Conformity 55.24 kB Last Modified 05/12/2022 CB Safety 388.14 kB Last Modified 02/26/2020 Declaration of Conformity (RoHS/CE) 442.33 kB Last Modified 12/18/2020 UL/CUL; Class1, Div. 2 388.14 kB Last Modified 02/14/2019 PI PROFIBUS Certification 158.38 kB Last Modified 09/15/2017 Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) 1.92 MB Last Modified 02/11/2022 Korean KC Registration 261.73 kB Last Modified 03/25/2020 Declaration of REACH Compliance 379.59 kB Last Modified 12/18/2025
