Home » Categories » Rockwell In-chassis » ControlLogix » PC56 |
Can I add the 40Gb IDE hard drive to my PC56-XP to supplement the factory installed 4Gb Compact Flash Card? |
Article Number: 409 | Rating: Unrated | Last Updated: Tue, Jul 1, 2014 at 8:24 PM |
Unfortunately, it is not possible to add the 40Gb IDE drive to a PC56-XP that came with a 4Gb Compact Flash (CF) card installed. Due to limitations of the PC56 BIOS, you can use either the CF card or the IDE drive; but not both. If you originally ordered your PC56-XP with the 4Gb CF card and you want to change to the 40 Gb IDE drive, you can return your PC56 to ProSoft for the changeover. This cannot be done in the field, as it requires specific changes to the BOIS and Operating System which are outside the level of expertise of the typical PC56 user. If you decide to make the change, be sure to use the Ethernet to back up all of the data that currently exists on the CF card before you send the PC56 to ProSoft. After the changeover, you will not be able to access that data from the CF card on the PC56 any more. |
Attachments (0)
![]()
There are no attachments for this article.
|
Comments
![]()
There are no comments for this article. Be the first to post a comment.
|
When trying to connect XML Loader, I get this error: "Failed to connect to the ECHO SDK Node PC56-HIST. -2147023174: The RPC server is unavailable." What do I do?
Viewed 1 times since Tue, Nov 8, 2011
Error: "OCXPAPI could not be found" while browsing tags in PC56-HIST
Viewed 1 times since Wed, Nov 29, 2006
Is Linux available on the PC56?
Viewed 1 times since Thu, Apr 26, 2007
How can I setup the PC56-SLS solutions to work with redundant ControlLogix processors?
Viewed 1 times since Tue, Feb 19, 2008
What are the differences between the rev A PC56 hardware and the rev B hardware?
Viewed 1 times since Tue, Jan 22, 2008
What can I do to troubleshoot connection problems between Echo Historian and OPC/SLS servers on the PC56/PC56CE/7000AppSrvCE platforms?
Viewed 1 times since Wed, Feb 6, 2008
What version of Windows CE is installed on the ProSoft PC56-CE inRAx PC?
Viewed 1 times since Wed, Dec 3, 2008
The PC56-CE sample program in my eMbedded Visual C, hangs my PC when I select 56SAM_FULL in the Select Active WCE Configuration Combo Box.
Viewed 1 times since Tue, Nov 28, 2006
Is there a way to enable/disable the logging feature in ArchestrA Logger (SMC-> PC56-OPC)?
Viewed 1 times since Fri, May 29, 2009
|