Two-Port Building Automation Gateway
What do you need help with?
Coil / Bit Addressing with a ProSoft inRAx Module
thing to remember, is that all of our modules are designed for 16 bit WORD addressing. With this in mind, if you enter an Internal Address value of "2", then we'd use that exact location for normal
Read moreConnectivity issues when subnet on VPN client collides with existing network configuration
with the same subnet as the one behind the Belden Horizon platform, either the ICX35-HWC or the PLX35-NB2. (IE: the same IP addressing as the VPN client.) For example, say your home network, is configured ... VPN, subnet, network, Route, routing, IPSEC, OpenVPN, NAT, Translation, PLX35-NB2, PLX35, Network Bridge, ICX35, ICX35-HWC
Read moreI'm getting an Error: Unknown Object, What does this mean?
not do what we requested because at least one of the objects we requested was not defined for them. So for example, if I requested the present value of AI 1, AI 2, and AI 3 from a device, but the device
Read moreI cannot locate the .EDS file for my ProSoft Product. Where can I get the proper .EDS file for my module?
of this. we do not provide .EDS files for every product which could support them. If you are in a situation where an .EDS file is required for a specific product, visit the product page off the main http
Read moreWhat is Enron-Daniels mode?
. This means that if you Attempt to read from 7001 with a count of 2, you would actually get 4 registers returned (two 32 bit floating values) instead of the usual two 16 bit registers. Many of our products can
Read more